Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Fulterer 16 inch side-mount ball bearing drawer slide is built for heavy-duty drawers that need to open past the cabinet face. Zinc-finished steel, a 198 lb weight capacity, and 1 inch of over-travel make it the right call when a standard 100 lb cabinet slide simply will not cover the load or the clearance.
An over-travel slide earns its place when the drawer sits beneath a countertop overhang or behind a deep face frame. At full open, the drawer member travels 1 inch past the slide's nominal length, so the back of the drawer clears the cabinet opening rather than hiding behind it. That extra inch matters most in shop drawers stacked with heavy tools, utility storage beneath a worktop, or deep kitchen drawers under a wide counter edge. At 198 lb per pair, this slide handles loads that would push a standard 100 lb cabinet slide well beyond its rating.
Cold-formed steel members carry a zinc finish that protects against the routine moisture and humidity of an indoor shop or kitchen environment. Zinc is the working standard for side-mount ball bearing slides — a functional, durable coating on hardware that lives beside the drawer box, mostly out of sight. This is an indoor slide; for wet rooms or exterior applications, specify a stainless or coated alternative.
Cabinet shops fitting out heavy utility drawers, contractors building shop storage, and homeowners adding serious pull-out capacity under a worktop are the typical buyers here. The 198 lb rating covers loaded tool drawers, heavy pantry pull-outs, and storage in commercial and institutional settings. The hold-in anti-rebound detent makes it especially useful in any setting where drawers are pushed shut firmly and must not drift or rebound — a shop floor, a busy kitchen, or a utility room where cabinet doors stay closed. The 1/2 inch side clearance per side is the standard for this segment, so the slide drops into the same drawer-box sizing formula as any other ball bearing side-mount.
Per pair. Both slides together carry 198 lb — do not double that number by counting each slide individually.
It holds the drawer in the closed position using a mechanical catch. The drawer stays shut until you pull it open intentionally. There is no spring assist and no damper — it will not pull the drawer shut on its own and it will not slow the close. It simply stops the drawer from bouncing back open after being pushed shut firmly.
The slide is 16 inches closed. Because it is an over-travel design, the drawer member travels the full length of the slide plus 1 additional inch — bringing the drawer past the cabinet face and clearing any overhang at that depth.
Yes. In a face-frame cabinet the cabinet side is set back from the face, so the rear of the slide needs support. Add the matching Fulterer rear mounting brackets, sold separately. In a frameless cabinet the slide screws directly to the cabinet side panel.
No. The slide is non-handed — both slides in a pair are identical and fit either side of the drawer box.
When a standard-duty slide is undersized and a countertop overhang cuts off access to the back of the drawer, this Fulterer over-travel slide resolves both problems at once — heavy capacity, a stay-closed detent, and an extra inch of travel in a standard side-mount format.
