Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Fulterer 18 inch over-travel side-mount ball bearing drawer slide delivers 1 inch of travel beyond full extension and a 198 lb weight capacity, all in a zinc-finished steel package that disappears into the cabinet interior. It is the right call when the load is heavy, the counter overhangs the cabinet, or the face frame runs deep enough to rob the drawer of useful reach at full open.
At full open on a conventional full-extension slide, the drawer face sits at the cabinet opening. Add a counter overhang, a thick face frame, or a deep apron rail, and the back of the drawer retreats behind that obstacle. The extra inch of over-travel on this slide moves the drawer past the obstruction so the rear contents are actually reachable, not just theoretically exposed. Shop cabinets under a workbench top, kitchen base drawers beneath a stone countertop, and utility cabinets with substantial face frames are all natural fits. The 198 lb capacity means the slide matches the weight that tends to fill those drawers: hand tools, fastener bins, cast iron, and anything else that would overwhelm a standard kitchen-class slide.
The slide is cold-formed steel with a zinc finish, the established standard for side-mount ball bearing slides used indoors. Zinc plating resists the humidity and incidental contact that accumulates in a working shop or kitchen cabinet over years of use. It is not a decorative finish and is not rated for wet or outdoor conditions, which is exactly right for a slide that lives inside a cabinet box. Ball bearings run in full-length steel raceways for smooth, consistent travel whether the drawer is empty or loaded to capacity. The zinc tone blends with the cabinet interior rather than drawing attention, which matters in open-faced shop cabinets and frameless kitchen builds where the slide is occasionally visible from the side.
The combination of over-travel and a 198 lb rating makes this a specialist tool rather than a general-purpose cabinet slide. If the drawers are standard kitchen depth with no overhang and a modest load, a plain full-extension slide in the 100 lb class will do the job at lower cost. This slide earns its place when at least one of the defining conditions is present: a physical obstruction that a standard slide cannot clear at full open, or a load that exceeds what standard-class hardware is rated to carry. The non-handed format means one SKU covers every drawer in the cabinet, and the hold-in detent keeps loaded drawers from creeping back open on sloped floors or under vibration. Sold as a pair; build the drawer box 1 inch narrower than the opening to maintain the required 1/2 inch side clearance on each side. For face-frame cabinet installations, rear mounting brackets are required to support the back of the slide and are sold separately.
When the drawer is fully open, the drawer box travels 1 inch past the point where a standard full-extension slide stops. That extra inch is what clears a countertop overhang or a deep face frame so the back of the drawer is accessible instead of blocked.
The 198 lb weight capacity is the rating for the pair of slides working together as installed. Do not halve it or double it; order one pair per drawer and compare the loaded drawer weight against the 198 lb figure.
No. The hold-in anti-rebound detent catches and holds the drawer in the closed position once you push it shut, preventing bounce-back. There is no spring to pull it closed and no damper to slow it. If you need the drawer to pull itself shut, look at a self-close or soft-close model instead.
No. The slide is non-handed, so both pieces in the pair are identical. Order one pair per drawer and install either slide on either side of the box.
Side-mount slides in face-frame cabinets need rear mounting brackets to support the back end of the slide where the cabinet side is set back from the face frame. The brackets for this series are sold separately; confirm the correct bracket for Fulterer over-travel slides before ordering.
When the drawer has to push past an overhang and carry a heavy load doing it, this Fulterer zinc over-travel slide with its hold-in detent handles both demands in one non-handed, field-proven package.
Sold In: 10 Set
