Zinc Finish And Over-Travel Performance Built for Heavy Work

This is a 14 inch side-mount ball bearing drawer slide from Fulterer's over-travel line, rated 198 lb per pair and finished in zinc. It carries a hold-in anti-rebound detent and extends 1 inch past full travel — a combination built for heavy drawers in shop, utility, and worktop applications where the zinc finish blends with the cabinet interior and holds up through daily use.

Key Features

• 198 lb weight capacity per pair — well above the standard 100 lb cabinet class, suitable for drawers loaded with tools, hardware, or heavy stock.
• Over-travel extends 1 inch past full extension — the drawer clears countertop overhangs and deep face frames so the rear contents are fully reachable.
• Hold-in anti-rebound detent — a mechanical catch keeps the drawer closed and prevents bounce-back after a firm push; no spring, no damper.
• Steel ball bearings in full-length raceways — consistent, smooth travel under heavy load across the full 14 inch slide length.
• Non-handed design — identical slides fit left and right, so there is no sorting or misordering on the bench.
• Zinc finish over steel — standard indoor corrosion protection; the neutral zinc color recedes against most cabinet interiors.

Where This Slide Earns Its Place

The 14 inch length suits compact but demanding drawers: a shop cabinet under a workbench, a tool drawer in a mobile cart, a utility cabinet where the opening is shallow but the contents are heavy. The 1 inch of over-travel is the practical detail that makes a worktop drawer actually useful — push the drawer past the face of the cabinet and the back is accessible without reaching in blind. The 198 lb rating covers a drawer packed with hand tools, hardware bins, or dense shop supplies without asking the slide to work near its limit. This is a standard-motion slide with a hold-in detent: no closing assist, no damper, just a solid catch that stops the loaded drawer from rebounding open when shut firmly.

Steel, Zinc, and Built for Indoor Service

The slide is cold-formed steel throughout, with ball bearings running in full-length formed raceways between three telescoping members. The zinc electroplate is the segment's standard functional finish — it protects the steel through years of indoor use and does not add thickness that would affect the 1/2 inch side clearance per side. Zinc is not a decorative or stainless finish, and this slide is rated for dry indoor environments. The neutral tone works well in both painted and natural wood cabinet interiors without drawing attention to the hardware.

The Right Fit for Shop and Utility Work

This slide is at home in applications where load capacity and over-travel matter more than concealed hardware or soft-close motion. Cabinet shops building tool storage, contractors fitting utility cabinets, and homeowners tackling a garage or workshop build all land in this slide's wheelhouse. The non-handed 14 inch format keeps the order simple: count the drawers, order the pairs. For face-frame cabinets, rear mounting brackets are required to support the back of the slide — those are sold separately and are series-specific, so confirm the matching bracket before installing in face-frame construction.

Heavy Load, Clean Install, No Guesswork

A 198 lb rated over-travel slide in a neutral zinc finish handles the heavy end of shop and utility drawer work while staying out of sight behind the drawer box. Count the drawers, order the pairs, and get the job moving.