Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a 22 inch side-mount ball bearing drawer slide from Fulterer, rated 198 lb per pair, with 1 inch of over-travel past full extension and a hold-in anti-rebound detent that keeps the drawer firmly closed until pulled. The zinc finish is the standard working finish for this series, blending cleanly into cabinet interiors while resisting the corrosion of everyday indoor use.
A standard full-extension slide brings the drawer to the cabinet face. An over-travel slide goes further — this one pushes the drawer 1 inch past the nominal slide length, which matters when a countertop overhang, deep face frame, or molding profile sits between the open drawer and the person using it. Workshop benches, kitchen islands, utility cabinets under overhanging tops, and file setups beneath worktops are the natural fits. The hold-in anti-rebound detent adds a practical benefit in those same environments: in a busy shop or a frequently accessed utility drawer, the detent stops the drawer from bouncing back open after a firm close, keeping the aisle clear.
The slide is cold-formed steel with a bright zinc finish. Zinc is the working standard for side-mount ball bearing slides in indoor cabinetry — it protects the steel members from humidity and light moisture without adding the cost of a decorative finish. These slides sit beside the drawer box when the drawer is open, so the finish is functional rather than decorative. For applications where a darker finish is preferred, a black-finish variant is available in this series.
The 198 lb rating and 1 inch over-travel put this slide in a specific tier: heavier than a standard cabinet drawer slide, with the extra travel that resolves countertop or frame clearance problems. Cabinet shops specifying utility rooms, mudroom built-ins, or workshop storage will find the load class appropriate for drawers carrying tools, hardware, or files. Contractors and renovation teams dealing with existing overhangs can use the over-travel to restore full drawer access without reconfiguring the cabinet box. Homeowners building or retrofitting shop storage get the same benefit. This is a standard-motion, side-mount installation — the slide is visible beside the open drawer and requires no special tools to install.
Neither. The hold-in anti-rebound detent is a mechanical catch that keeps the drawer closed once pushed shut and prevents it from bouncing back open. There is no damper and no spring to pull the drawer closed — this is a standard-motion slide with a stay-closed detent.
The over-travel extension on this slide is 1 inch past the nominal slide length. A standard 22 inch full-extension slide brings the drawer to the cabinet face; this slide carries it 1 additional inch past that point.
No. This slide is non-handed — both slides in the pair are identical and either one fits either side of the drawer.
Build the drawer box 1 inch narrower than the cabinet opening — the slide requires 1/2 inch of side clearance on each side between the drawer box and the cabinet interior.
Side-mount ball bearing slides in face-frame cabinets need rear support because the cabinet side is set back from the face frame. Add the appropriate rear mounting brackets for this series, sold separately, to support the back of the slide.
When the load exceeds a standard cabinet slide and the cabinet geometry puts the drawer behind a countertop or frame overhang, this zinc-finished Fulterer over-travel slide delivers the capacity and the clearance in one straightforward side-mount package.
Sold In: 8 Set
