Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt TRU-TRAC 100 is a 14 inch full-extension side-mount ball bearing drawer slide, rated 100 lb per pair, finished in zinc. It is built for standard cabinet work where a reliable slide, honest extension, and a neutral finish that disappears behind the cabinet face are all that is needed.
A 14 inch slide suits shallower drawers: spice pullouts, bathroom vanity drawers, desk utility trays, and small upper cabinet drawers where interior depth is limited. Full extension at this length means the complete drawer interior comes clear of the opening — no reaching past the cabinet face to find what is in the back. The standard-motion design (no soft-close, no detent) keeps the mechanism simple and the price direct, which suits production runs where motion features are not part of the spec.
Steel members carry a zinc electroplate finish — the workhorse surface treatment for side-mount ball bearing slides in indoor cabinet applications. Zinc is not a decorative finish and it is not stainless; it is a functional coating that handles the humidity and handling of a normal interior environment for years of service. The neutral silver tone sits quietly beside the drawer box without drawing attention, which matters in frameless cabinets where the slide is visible from the side when the drawer is open.
Cabinet shops running production kitchens or bath vanities reach for the TRU-TRAC 100 when the spec calls for a reliable 100 lb full-extension slide at a 14 inch length and no motion feature is required. The bulk-pack format suits shops ordering in volume rather than retail quantities. Designers specifying shallow drawer banks and contractors finishing out vanity cabinets also land here when the drawer depth is in the 14 inch range and the finish just needs to be standard zinc.
This SKU is packaged as a bulk-pack. Confirm the per-unit count at checkout — bulk-pack slides in this class are commonly sold as pairs, but verify the quantity your order reflects.
The 14 inch figure is the closed slide length. Match it to your cabinet's interior depth — you need enough clearance behind the slide for it to seat properly. Measure the interior depth before ordering rather than working from the door opening.
Yes. Full extension means the drawer member travels the slide's full length, bringing the complete drawer box clear of the cabinet opening. The rear of the drawer is fully reachable at full open.
Side-mount slides in a face-frame cabinet need rear support since the cabinet side is set back from the frame. Add matching rear mounting brackets — these are sold separately and are series-specific. A standard direct-mount into the side panel works in frameless construction without additional hardware.
This model is standard motion — no damper, no spring, no detent. The drawer stays where it is left. If damped closing is part of the project spec, look at the soft-close variants in the TRU-TRAC or KV FM series at the same length.
When the spec is full extension, 100 lb, 14 inch, zinc, and nothing more — this is the slide that gets the job done without overcomplicating the order.
Sold In: 1 Set
