Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt TRU-TRAC 100 is a 24 inch full-extension side-mount ball bearing drawer slide rated 100 lb per pair, finished in zinc, and sold in bulk quantity. It is the right slide when you need a functional, workhorse finish that disappears inside the cabinet and holds up through years of daily use.
At 24 inches, this slide suits kitchen base cabinet drawers, utility cabinet pulls, and shop storage drawers with a comparable box depth. Full extension means every drawer paired with it opens completely — no reaching into the back of the cabinet past a stopped drawer face. Standard motion means no closing mechanism: the drawer rides the bearings and stays wherever it is left, which makes it a straightforward drop-in for cabinet runs where soft-close or self-close is not part of the spec. If the project calls for a closing feature, the TRU-TRAC 100 is not that slide.
Zinc is the practical finish choice for interior cabinet work. It protects the steel members through normal indoor use, resists the humidity swings in a kitchen or shop environment, and costs nothing extra to match — because inside a closed drawer box, the slide finish is invisible in normal operation. For cabinets where the slide is visible when the drawer is open, zinc reads as a clean, neutral grey that does not compete with the cabinet interior. This is not a decorative finish and it is not rated for wet, outdoor, or washdown environments.
Cabinet shops running production quantities of kitchen and utility drawers are the core buyer for this SKU. The bulk packaging supports that workflow directly: fewer reorder cycles and consistent stock on hand for multi-drawer runs. Contractors sourcing hardware for a renovation and homeowners building out a shop or laundry room reach for the same slide when they want proven full-extension performance at a 100 lb rating without paying for motion features they do not need. Because the slide is non-handed, estimating quantity is simple: count the drawers and order that many pairs.
No. Twenty-four inches is the closed length of the slide. Because it is a full-extension design, the drawer travels approximately the full slide length — bringing the entire drawer out past the cabinet face — but slide length and drawer travel are two separate specs.
Yes, for normal indoor kitchen use. Zinc plating on steel is the standard corrosion-resistant finish for side-mount slides and handles typical humidity and temperature variation in a residential or light commercial kitchen. It is not rated for exterior, marine, or washdown applications.
It can, but face-frame construction sets the cabinet side back from the front frame, so the rear of the slide needs support. In face-frame installs, add the appropriate rear mounting brackets — these are sold separately and are series-specific.
Build the drawer box 1 inch narrower than the cabinet opening. That leaves the required 1/2 inch of side clearance for each slide, one on either side of the box.
This SKU ships in bulk-pack quantity. Confirm the pack count on the product page before placing a volume order — bulk packs for this line contain multiple pairs.
When the job calls for full-extension performance at a 100 lb rating in a zinc finish, without motion features adding cost or complexity, the TRU-TRAC 100 covers it — in bulk quantity, ready for production runs.
Sold In: 1 Set
