Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt TRU-TRAC 100B is a 22 inch full-extension side-mount ball bearing drawer slide, rated 100 lb per pair, finished in zinc for lasting indoor service. It is the workhorse choice for cabinet shops and contractors running production kitchens, utility cabinetry, and office furniture where the volume is high and the specification is straightforward.
A 22 inch full-extension slide suits face-frame and frameless cabinets with a standard interior depth. The non-handed design cuts assembly time on large runs — no separating left from right, no mislabeled pairs. This is a standard-motion slide: no self-close, no soft-close, no detent. The drawer stays wherever it is left, which is exactly right for applications where a damper would add unnecessary cost or where push-to-open hardware will be added at the front. The 1/2 inch side clearance is the segment standard, so the drawer box is built 1 inch narrower than the opening.
Zinc plating over cold-rolled steel is the reliable standard for side-mount ball bearing slides installed indoors. The finish resists the everyday moisture and humidity of a kitchen or office environment without showing through the drawer gap. It is a functional, professional finish — visible beside the open drawer, but engineered to stay that way for years without surface degradation. This is not a decorative or stainless finish; it is sized for interior cabinetry where durability matters more than aesthetics.
The 22 inch length matches deep base cabinet drawers — pots-and-pans drawers, full-depth utility drawers, and deep file drawers in the standard 100 lb class. The Bulk-Pack format makes the TRU-TRAC 100B a practical choice for shops ordering by the project rather than the pair. In face-frame cabinet installations, add series-compatible rear mounting brackets at the back of the cabinet to give the slide proper support — brackets are sold separately. Frameless cabinets take direct side-panel mounting on the 32mm system grid without additional hardware.
No. Zinc is electroplated over steel for indoor corrosion resistance. It is not stainless steel and is not rated for wet, marine, or washdown environments. For those applications, look for a stainless-steel slide in the appropriate series.
Neither. The TRU-TRAC 100B is a standard-motion slide — no spring, no damper. The drawer stays at whatever position it is left. If you need soft-close, look at the KV FM soft-close series in the same length.
The slide requires 1/2 inch of side clearance per side. Build the drawer box 1 inch narrower than the cabinet opening to leave the correct gap on each side.
No. The TRU-TRAC 100B is non-handed — every slide in the pack fits either side. Order the quantity your drawer count requires without worrying about handed pairs.
Yes, but face-frame installations need rear mounting support. Add series-compatible rear mounting brackets at the back of the cabinet — they are sold separately. Frameless cabinets mount directly to the side panel.
The TRU-TRAC 100B in zinc delivers the full-extension, 100 lb per pair performance that production cabinet work depends on — in a bulk format that keeps the shop stocked and the drawer line moving without interruption.
Sold In: 1 Set
