Knape and Vogt SF Series Stainless Steel 10-1/16"L x 2"D x 3"H x Sink Tip Out Tray, No Tab Stop - SF10

Knape And Vogt Sink Tip-Out Tray For Cabinets

Knape and Vogt sink tip-out tray SF10 is a stainless steel tray designed to turn a sink false front into a usable tip-out storage space. The tray measures 10-1/16 inches long, so it suits narrow cabinet openings where a longer unit will not fit. Its 2 inch standard depth creates a shallow compartment that keeps small items accessible while staying clear of under-sink hardware and plumbing. With a 3 inch height, the SF10 provides enough sidewall to hold contents securely when the panel is opened. The SF Series value line construction in steel gives a rigid body that handles repeated opening and closing in everyday kitchen and bath use. Because the SF10 is a sink tip-out tray without a tab stop, it works where installers want the stop function handled by the chosen hinges rather than the tray body.

Key SF10 Sink Tip-Out Tray Details

• The SF Series value line of steel sink tip-out trays uses steel construction, which provides a sturdy metal body suited to frequent operation in kitchen and bath cabinetry.
• The SF10 tray is stainless steel, so the metal material matches common sink areas and resists typical moisture around kitchen and bath sinks.
• The 10-1/16 inch length allows the tray to fit shorter false-front openings, which helps when working in compact base cabinets or split-front layouts.
• The 2 inch standard depth creates a shallow storage space that keeps items near the front, simplifying access when the panel tilts open.
• The 3 inch height gives the tray enough sidewall to retain contents during tipping, supporting dependable operation over repeated cycles.
• The SF10 version is supplied without a tab stop, letting hinge hardware control the opening angle for consistent alignment with the cabinet face.

Installation Use With Face Frame Or Frameless

The SF Series sink tip-out trays are listed for use with face frame or frameless cabinetry, so the SF10 works in both construction styles. This matters when outfitting mixed layouts in the same job, because the same tray style can be specified across different cabinet lines. The SF10 uses a standard depth of 2 inches, which helps it sit behind the false front without projecting too far into the under-sink cavity. Its 10-1/16 inch length is sized for openings where a full-width tray is not practical, such as smaller bases or divided fronts. With no tab stop on the tray itself, installers can rely on compatible hinges to define the front tilt range, keeping the false front aligned with surrounding doors when closed.

Where SF10 Stainless Tray Fits Best In Use

Face Frame And Frameless Sink Cabinet Applications

The SF Series sink tip-out trays are specified for use with face frame or frameless cabinetry, so the SF10 suits both traditional and European-style cabinet constructions around kitchen and bath sinks. On face frame cabinets, the 10-1/16 inch length works well behind narrower false fronts where stiles or center rails reduce the available width. On frameless cabinets, the same length helps clear hinge hardware and maintain space for plumbing below. The 2 inch standard depth keeps the tray toward the front plane of the cabinet, which is useful when traps and supply lines occupy much of the interior. Because the SF10 is part of a line offered in 10 lengths ranging from 10 inches to 32-5/8 inches long, it can be specified alongside longer SF Series trays to cover multiple sink cabinet sizes on the same project while maintaining a consistent profile and material.

Details That Support Repeatable Sink Front Layouts

The SF10 tray is stainless steel with a 3 inch height, so its rigid, high-side profile helps maintain shape and alignment through frequent opening cycles at the sink. The standard 2 inch depth without tab stop lets hinge hardware control the pivot and limits, which supports repeatable reveals from cabinet to cabinet when the same hinge style is used. Being part of the SF Series value line of steel sink tip-out trays, the SF10 shares a common design language with the deeper 3 inch SF Series versions that feature tab stops, helping designers keep a unified look even when depth requirements differ. The SF10 model designation and SF Series branding simplify re-ordering or matching existing installations, since the same SF10 part number identifies this 10-1/16 inch long, standard-depth, no-tab-stop configuration across projects.

Common Questions About The SF10 Sink Tray

Selecting The SF10 Tray For Your Next Sink Run

The SF Series stainless steel 10-1/16 inch long x 2 inch deep x 3 inch high SF10 sink tip-out tray gives a defined storage space behind a sink false front in both face frame and frameless cabinets. Its standard-depth design, stainless steel material, and no-tab-stop configuration help align the tray with typical under-sink layouts and hinge-controlled motion. For projects using Knape and Vogt SF Series value line of steel sink tip-out trays, choosing the SF10 model provides a compact, consistent option for shorter sink fronts.