Knape and Vogt SF Series Stainless Steel 12-7/8"L x 3"D x 3"H x Sink Tip Out Tray, With Tab Stop - SF11W

Knape And Vogt SF Series Sink Tip Out Tray Use

Knape and Vogt SF Series sink tip out tray gives a cabinet false front a usable storage pocket at the sink, turning dead space into a small parts and cleaning tool holder right where work happens. This stainless steel tray measures 12-7/8 inches long by 3 inches deep by 3 inches high, so it provides a defined space for commonly used items without interfering with typical sink activity. The tray belongs to the KV SF Series value line of steel sink tip-out trays, which keeps the material consistent across installations in a shop or project run. It is designed for use with face frame or frameless cabinetry, which lets installers carry one solution across different kitchen or bath construction styles. This SF11W model is a deep depth, 3 inch deep tray with tab stops, so it opens to a controlled angle for predictable day-to-day use.

Steel Sink Tip Out Tray Details For Pros

• This SF Series tray is made from steel, giving the storage compartment a rigid structure that handles repeated opening and closing in typical kitchen and bath cabinet environments.
• The stainless steel construction provides a metal surface that supports wet-area use at a sink location, keeping the storage zone aligned with the demands of water, cleaners, and frequent contact.
• The SF11W tray length of 12-7/8 inches fits runs where a moderate-width false front is specified, helping lay out under-sink fronts so the opening lines up with common cabinet sink sizes.
• A depth of 3 inches defines this unit as a deep-depth tray, creating extra front-to-back storage room compared to standard 2 inch options in the same SF Series family.
• The 3 inch height keeps smaller items nested within the tray profile, helping reduce the chance of contents tipping as the false front is tipped open at the sink.
• Use with face frame or frameless cabinetry gives flexibility across cabinet lines, allowing the same tray concept to be applied whether the job calls for traditional frames or contemporary frameless boxes.

Sink Tip Out Tray Fit And SF11W Mounting Context

This SF11W stainless steel tray is part of a system intended for sink tip out use, so it is sized for the space directly behind a false front at a sink cabinet. The 12-7/8 inch length supports layouts where the opening is matched to a single moderate-width front, helping align the tray with hinge hardware specified for tip-out action. Its 3 inch depth and 3 inch height define the pocket geometry behind the false front, so the opening arc stays practical for retrieving items without crowding the sink bowl region. Being suitable for face frame or frameless cabinetry means the tray works within different stile and side panel configurations, giving shops a consistent interior component regardless of external cabinet style.

Where This SF11W Sink Tip Out Tray Fits Best

Using The SF Series Tray In Cabinet Runs

The SF11W model sits within the KV SF Series value line of steel sink tip-out trays, which is designed specifically for creating storage behind false fronts at kitchen or bath sinks. Because it carries a 12-7/8 inch length, it aligns well with cabinet fronts sized in that range, letting installers choose this tray when a single false front panel of similar width is used above the sink doors. The tray works with both face frame and frameless cabinetry, so it can be applied in traditional framed kitchen runs or contemporary frameless bath vanities without changing the basic storage component. As part of a series that offers lengths from 10 inches to 32-5/8 inches, the SF11W length can be planned alongside other SF models to cover wider sink openings using multiple fronts along a run. Its stainless steel construction positions it at the wet end of the cabinet layout, following the sink location where splashes and cleaning tools are expected.

Why SF11W Deep Tray Design Supports Workflow

This SF11W unit is the deep depth option in the SF Series, at 3 inches deep, so it provides more front-to-back volume than standard 2 inch deep SF models and supports storing slightly bulkier sink-related items. The 3 inch height combines with that depth to create a more enclosed pocket, helping keep contents in place as the front is tipped out and back in during normal use. Built from steel in a stainless steel execution, the tray delivers a sturdy interior part that holds its shape as the false front hardware cycles over time. Tab stops are integrated into the deep-depth design, so the opening arc is limited by the tray, giving a repeatable open position for the tip-out movement. That predictable stop helps align how far the front moves each time, which matters when matching the tray to hinges and clearances around the sink edge and countertop. Across a project that uses multiple SF Series lengths, this SF11W keeps the deep-depth geometry consistent on every cabinet where this size is selected.

Common SF11W Sink Tip Out Tray Questions

Selecting The SF11W Tray For Sink Storage Runs

The SF11W stainless steel sink tip out tray from Knape and Vogt brings a defined 12-7/8 inch by 3 inch by 3 inch storage pocket to the space behind a sink false front. Its role within the SF Series value line gives access to a coordinated family of steel tray lengths from 10 inches to 32-5/8 inches, so this model can be matched with others when a project spans multiple sink cabinet widths. With deep-depth 3 inch geometry, tab stops, and suitability for face frame or frameless cabinetry, it supports straightforward planning of sink-front storage across different cabinet constructions. For projects calling for a metal tip-out solution at the sink, this SF11W tray offers dimensions and material that align directly with that use.