48" KV80 Regular-Duty Shelf Standard, Anochrome Finish 25/Box
Description
48 Inch KV80 Shelf Standard For Adjustable Runs
48 inch KV80 shelf standard describes a Knape and Vogt upright designed for adjustable shelving runs in closets, cabinets, and storage layouts. The standard is part of the KV Model KV80 system, which is typically used with KV180, KV181, KV160, or KV179 series brackets, so installers can tie shelf support directly to a known, matched bracket family. The material is 16-gauge steel, giving the upright a solid base for regular-duty shelf loads in woodwork and closet projects where metal standards carry the vertical load. The finish is anochrome, which provides a neutral, professional look that blends easily with other hardware and many shelf materials. The standard length is 48 inches, fitting mid-height walls and cabinet interiors where a full vertical range of shelf adjustment is needed without running floor-to-ceiling hardware.
Job-Ready Details On This KV80 Shelf Standard
- The standard is 5/8 inch wide, so it fits narrow cabinet sides and closet panels while still giving enough bearing surface for KV brackets.
- The depth is 13/32 inch, which keeps the standard low profile in the side panel while still housing the bracket slots for secure engagement.
- The KV80 standard adjusts in 1 inch increments, letting installers set shelf heights in consistent steps that match typical storage spacing.
- Screw holes are spaced 12 inches apart on center, so fasteners land in predictable positions along studs or cabinet sides for repeatable layouts.
- The recommended fasteners are KV80-80 screws, which match the manufacturer setup and help maintain consistent anchoring along the run.
Mounting And Layout Details For KV80 Standards
The 48 inch KV80 regular-duty shelf standard uses screw holes spaced 12 inches on center, so installers can lay out attachment points in simple foot-based intervals along studs or cabinet sides. The 5/8 inch width gives a slim footprint that sits comfortably on typical 3/4 inch panels, leaving material around the fastener area. The 13/32 inch depth keeps the standard close to the panel face, so brackets from the KV180, KV181, KV160, or KV179 series sit tight to the surface. The 1 inch adjustment increments across the 48 inch length give a broad band of usable shelf locations, helping match both low and high positions without custom drilling.
Using The 48 Inch KV80 Standard In Projects
Where This 48 Inch KV80 Standard Fits Best
The 48 inch KV80 regular-duty shelf standard fits projects that call for mid-height shelving, such as closet walls, pantry sections, and cabinet interiors that do not run full room height. The upright length balances reach and handling, making it practical where 36 inch options are too short and taller standards would extend past the working area. The KV Model KV80 design is typically used with KV180, KV181, KV160, or KV179 series brackets, so installers building adjustable shelf rows can pair uprights and brackets from a single Knape and Vogt system. The 5/8 inch width and 13/32 inch depth sit well on wood casework, leaving edge distance for drilling while still keeping the metal upright tight to the panel for a clean vertical line.
Details That Support Consistent Shelf Alignment
The KV80 standard adjusts in 1 inch increments, which means each bracket position aligns to a regular grid, helping installers keep multiple shelves level across a run of uprights. This incremental pattern simplifies laying out matching shelf heights on opposite walls or adjacent cabinet bays, because each slot corresponds to a fixed step. Screw holes spaced 12 inches apart on center let installers tie the 16-gauge steel standard into wall framing or panel sections at even intervals, helping distribute shelf loads along the height. The anochrome finish presents a uniform surface along the upright, so bracket engagement with the slots remains consistent from top to bottom. Using the recommended KV80-80 screws supports a fastening setup chosen for this standard, helping the system behave predictably when shelved weight is applied.
Common Questions About The KV80 Shelf Standard
What type of product is the 48 inch KV80 standard?
The 48 inch KV80 regular-duty shelf standard is a Knape and Vogt vertical steel upright used to support adjustable shelving when paired with matching KV bracket series.
Which brackets work with this KV80 shelf standard?
The KV80 shelf standard is typically used with KV180, KV181, KV160, or KV179 series brackets, so shelves can be supported within the same Knape and Vogt system.
How does the 1 inch adjustment affect shelf layout?
The KV80 standard adjusts in 1 inch increments, allowing shelf heights to be set on a consistent grid and making it easier to match levels across multiple uprights.
What are the key dimensions of this shelf standard?
The KV80 shelf standard is 48 inches long, 5/8 inch wide, and 13/32 inch deep, giving a slim profile that still provides full bracket engagement area.
How are mounting holes arranged on the KV80 standard?
The KV80 shelf standard has screw holes spaced 12 inches apart on center, which supports straightforward layout along studs or cabinet sides.
What material and finish does this KV80 standard use?
The 48 inch KV80 shelf standard is made from 16-gauge steel with an anochrome finish, providing a sturdy metal upright with a neutral, professional appearance.
Selecting This KV80 Standard For Your Shelving Run
The 48 inch KV80 regular-duty shelf standard in anochrome finish gives installers a 16-gauge steel upright built for adjustable shelving using the KV Model KV80 system. With 1 inch adjustment increments, 5/8 inch width, and screw holes spaced 12 inches on center, it supports measured layouts in closets, cabinets, and storage walls. Pairing this standard with the typical KV180, KV181, KV160, or KV179 brackets ties vertical support and brackets into one coordinated Knape and Vogt solution for your next shelving run.
