Standard Duty Shelf Standards Single Slotted - Knape And Vogt 80BP ANO 96

Knape And Vogt Shelf Standard For Adjustable Runs

Knape and Vogt shelf standard gives you a straight, continuous track to support adjustable shelving runs in closets, garages, or storage walls. This standard duty, single slotted upright is identified by manufacturer part 80BP ANO 96, so it matches the KV80 series system. The 96 inch length lets you span tall walls from low to high shelves in one piece, which helps keep rows of brackets aligned. The steel standard measures 5/8 inch wide by 13/32 inch deep, so it fits tight to the wall without stealing much usable depth from the shelf. The anochrome finish provides a neutral, professional look that works in many cabinet or storage layouts. Being part of Knape and Vogt shelf, closet and garage organization hardware, this standard ties into a familiar layout pattern for many installers.

Standard Duty Shelf Details That Save Time

• This 96 inch standard duty shelf standard is single slotted, which gives each bracket one secure seat and keeps shelf positions clearly defined along the run.
• The KV80 shelf standard is typically used with KV180, KV181, KV160 or KV179 series brackets, so you can match uprights and brackets from the same Knape and Vogt system.
• The standard adjusts in 1 inch increments, allowing installers to step shelf heights in predictable moves that line up across multiple standards in a row.
• Dimensions of 5/8 inch wide by 13/32 inch deep keep the upright slim, helping it sit close to the wall while still giving enough steel section to support standard duty loads.
• Construction in 16 gauge steel gives the standard a solid, uniform profile that works well for straight, plumb installations on typical wall substrates.
• Screw holes spaced 12 inches apart on center let you set a regular fastening pattern, which simplifies layout over studs or other backing.

KV80 Shelf Standard Mounting And Layout

The KV80 shelf standard uses screw holes spaced 12 inches apart on center, so you can mark fastener locations in a repeating pattern up the wall. The 5/8 inch wide x 13/32 inch deep profile sits neatly along the wall surface, which helps when running several standards side by side. At 96 inches long, each upright can bridge from near the floor to high storage without a splice, supporting long vertical runs of brackets. Adjustment in 1 inch increments along the single slot gives installers a simple way to keep shelf levels consistent between adjacent standards. Recommended fasteners are KV80-80 screws, sold separately, tying the installation into the Knape and Vogt system details.

Using The KV80 Standard In Shelf Projects

Where This Standard Duty KV80 Works Best

This KV80 standard duty shelf standard, at 96 inches, suits tall pantry walls, closet systems, and garage organization where full-height uprights are helpful. Being part of Knape and Vogt shelf, closet and garage organization hardware, it pairs logically with storage layouts in those spaces. The single slotted design works with KV180, KV181, KV160 or KV179 series brackets, so you can design rows of shelving with matching supports. The 5/8 inch width lets you fit standards between studs or panel edges without crowding other hardware, while the 13/32 inch depth keeps the standard close to the wall, supporting shelves without pushing them too far forward. The anochrome finish gives a consistent, neutral color across multiple standards, which matters when they remain visible in open shelving runs.

Details That Support Repeatable Shelf Alignment

Adjustment in 1 inch increments lets you plan shelf heights by simple whole-number spacing, which helps keep elevations consistent across a wall of standards. Screw holes at 12 inches on center set a predictable fastening pattern, which supports plumb alignment because each upright is anchored at regular intervals. The 16 gauge steel material gives each standard a stable, straight profile, which helps when you are trying to line up several rows of brackets. Matching this KV80 standard with KV180, KV181, KV160 or KV179 series brackets keeps bracket engagement consistent along the length, so each shelf position seats the same way. The 96 inch length reduces the number of joints or cut pieces in a tall installation, which helps keep bracket rows straight and reduces layout steps. The anochrome finish supports a uniform appearance from top to bottom, which matters when shelves are adjusted over time and more of the upright becomes visible.

Common Questions About KV80 Shelf Standard Use

Selecting The Right KV80 Standard For Your Run

This Knape and Vogt shelf standard in 96 inch length, part 80BP ANO 96, provides a tall, continuous upright for adjustable shelving. With a 5/8 inch wide by 13/32 inch deep profile and 16 gauge steel construction, it aligns with standard duty shelf runs. The 1 inch adjustment increments and 12 inch on center screw holes help streamline layout across multiple uprights. When your design calls for a single slotted KV80 track in anochrome, this model ties directly into the KV180, KV181, KV160 or KV179 bracket families for coordinated installations.