Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV180 shelf bracket in the 12 inch length gives installers a regular-duty support option for adjustable shelving where Knape and Vogt standards are used. This model is part of the KV180 series, so it matches a familiar layout for closet, garage, and utility shelving where standards and brackets carry the load. The bracket has an anochrome finish, which provides a neutral metallic look that blends with common KV80 standards in similar finishes for a consistent run. As a 12 inch bracket, it fits shelving depths in that range, letting you set up medium-depth shelves without overhang that can complicate layout around walls. KV180 is described as typically used with KV80 standards, so it fits into that style of wall standard to carry shelf loads across a continuous system.
The 12 inch KV180 shelf bracket is described as typically used with KV80 standards, so it slots into those standards to create an adjustable support grid. The bracket has 2 engagement teeth, which bite into the standard and fasten the bracket securely during installation. That tooth engagement helps the bracket stay seated while shelves are loaded, reducing movement that can shift spacing. The bracket also has a shelf lip at the end, giving the front of the shelf a physical stop that helps align boards consistently during installation and keeps them from sliding forward in use.
This 12 inch KV180 regular-duty shelf bracket is part of the Knape and Vogt shelf, closet, and garage organization category, so it fits projects where adjustable shelving is laid out along standards. The bracket is made from 16-gauge steel in the 4 to 12 inch lengths, so this 12 inch model uses that gauge to carry day-to-day storage loads in residential and light commercial spaces. Because it is typically used with KV80 standards, it supports runs where those standards are already specified on walls, allowing new shelves or reconfiguration using the same interface. The series has a weight rating of 120 to 320 lb per pair based on length, and the 12 inch sits within that range so installers can plan shelf spans according to bracket spacing and board strength.
The KV180 bracket has 2 engagement teeth to fasten the bracket securely to the standard, which helps maintain bracket position when shelves are loaded and unloaded over time. Those teeth give a defined indexing point in the KV80 style standard, so multiple brackets along a run line up reliably at each slot. The shelf lip at the end of the bracket gives the front edge of each shelf a repeatable stop, so boards seat to the same position across the wall without constant measuring. Material construction in 16-gauge steel for this length provides a rigid arm that resists flex within its weight rating range, supporting straight, level shelves when installed along multiple standards. Knape and Vogt also notes an alternative KV181 lipless version made of 16-gauge steel in selected sizes, giving designers an option when a front lip is not desired.
The KV180 12 inch shelf bracket is part of the Knape and Vogt shelf standards and brackets line, typically used with KV80 standards, so it supports adjustable shelving layouts on those standards.
The 12 inch KV180 shelf bracket supports shelves sized around that depth, so installers can set up medium-depth storage that balances capacity with aisle clearance in closets, garages, and similar spaces.
The anochrome finish on the KV180 shelf bracket provides a neutral metallic appearance that visually coordinates with similar Knape and Vogt standards for a consistent hardware look.
The KV180 shelf bracket uses 2 engagement teeth to fasten into the standard, which helps hold the bracket securely and keeps shelf levels consistent along the run under normal loading.
The 12 inch KV180 shelf bracket is made from 16-gauge steel, giving the arm stiffness suited to its regular-duty weight rating range for typical storage applications.
The KV180 shelf bracket has a shelf lip at the end, which provides a front stop so shelf boards register to the same position and resist sliding forward during loading.
The 12 inch KV180 shelf bracket in anochrome finish from Knape and Vogt gives shops a regular-duty option that ties directly into KV80 standards. With 16-gauge steel construction, 2 engagement teeth, a defined shelf lip, and a rated capacity range of 120 to 320 lb per pair based on length, it supports planned storage loads in closets, garages, and utility spaces. For projects using Knape and Vogt shelf standards and brackets, spec this 12 inch KV180 to match medium-depth shelves and keep hardware consistent across current and future installations.
Sold In: 100 Each
