72" KV80 Standard-Duty Shelf Standard, Anochrome Finish
Description
72 Inch KV80 Shelf Standard For Adjustable Shelving
72 inch KV80 shelf standard defines a vertical track for building adjustable shelving runs using Knape and Vogt components. This model is a standard-duty shelf standard in the KV80 series, giving you a predictable profile for closet, garage, or general storage layouts that rely on matching KV brackets. The standard is 5/8 inch wide by 13/32 inch deep, so it presents a slim face while keeping enough depth for bracket engagement in typical wall-mount shelving projects. It is made from 16-gauge steel, which provides a sturdy backbone for standard-duty loads when paired with the appropriate KV bracket series. The anochrome finish creates a neutral, metallic look that blends into many cabinet interiors and work spaces. This KV Model KV80 is typically used with KV180, KV181, KV160, or KV179 series brackets, aligning the standard and bracket geometry for predictable fit.
Key KV80 Shelf Standard Details For Planning
- The KV Model KV80 designation ties directly to a known Knape and Vogt standard-duty track, so installers can match it with KV180, KV181, KV160, or KV179 series brackets in a coordinated system.
- The 5/8 inch wide by 13/32 inch deep profile sets the wall footprint, helping you plan clearances behind finished shelving and align multiple standards across a run without guesswork.
- Construction from 16-gauge steel provides a solid mounting spine for standard-duty shelving layouts when fastened to a suitable surface using appropriate fasteners.
- The anochrome finish delivers a consistent, neutral metallic appearance that works in closets, garages, and utility spaces where a clean, unobtrusive look is preferred.
- Adjustment in 1 inch increments gives a predictable hole pattern for brackets, simplifying layout when you need shelf heights to line up across multiple standards.
- Screw holes spaced 12 inches on center support even anchoring along the length of the standard, which helps distribute load into the mounting surface over tall installations.
Mounting And Hole Layout On The KV80 Standard
This KV80 wall mounted shelf standard is designed to fasten through screw holes spaced 12 inches apart on center, so installers can quickly align with framing or backing during layout. The 72 inch length offers a tall vertical run, allowing multiple shelves to be positioned along one piece rather than stacking shorter standards. Adjustable slots set in 1 inch increments define bracket engagement points, which lets you shift shelf positions up or down while keeping consistent vertical spacing between brackets on each standard. The 5/8 inch width and 13/32 inch depth keep the track compact on the wall, which is useful when standards must sit close to cabinet sides or adjacent walls without crowding the shelf edges.
Using The 80 ANO 72 Standard In KV Systems
Where This KV80 Shelf Standard Fits Best
The 80 ANO 72 standard works as a vertical support in Knape and Vogt shelving systems that use KV180, KV181, KV160, or KV179 series brackets, giving you a coordinated track-and-bracket pairing. Its 72 inch length suits full-height closet sections, tall pantry bays, or workshop runs where multiple shelf levels share a single continuous standard. Because the standard is only 5/8 inch wide, it fits neatly on cabinet sides or wall studs without taking much front-facing space, which helps keep shelving visually clean. The 13/32 inch depth maintains a shallow projection from the surface, so it is practical where wall depth is limited or where users want shelves to sit close to the mounting plane.
Adjustment Pattern And Details That Support Layout
The adjustable shelf standard 1 inch increment pattern lets you fine-tune shelf spacing while still keeping bracket positions aligned from left to right across a bank of standards. When used with compatible KV180, KV181, KV160, or KV179 brackets, each slot in the KV80 standard defines a repeatable bracket position, which simplifies reproducing the same shelf heights across multiple bays. Screw holes spaced 12 inches on center give a regular fastening rhythm, helping you plan fastener locations relative to wall framing or cabinet backs before drilling. The 16-gauge steel body maintains its shape under standard-duty use, so the bracket engagement slots stay consistent along the length. The anochrome finish provides a uniform, metallic surface that suits applications where visible hardware should look orderly along the wall or inside cabinetry.
Common Questions About The KV80 AnoChrome Standard
What is the overall length of the 80 ANO 72 standard?
The 80 ANO 72 standard has a 72 inch length, giving you a tall vertical track for stacking multiple shelves along one continuous run.
Which bracket series work with the KV80 shelf standard?
The KV80 shelf standard is typically used with KV180, KV181, KV160, or KV179 series brackets, so bracket hooks and slots align within the same Knape and Vogt system.
How wide and deep is this KV80 wall mounted shelf standard?
The KV80 standard measures 5/8 inch wide by 13/32 inch deep, which defines its wall footprint and helps with planning clearances behind and beside shelves.
What adjustment spacing does the KV80 standard provide?
The KV80 standard is adjustable in 1 inch increments, so each shelf position can move up or down in 1 inch steps while keeping brackets aligned across standards.
How are the mounting holes arranged on the 72 inch standard?
The 72 inch KV80 standard has screw holes spaced 12 inches apart on center, creating a regular pattern for anchoring along its full length.
What material and finish are used on the 80 ANO 72?
The 80 ANO 72 standard is made from 16-gauge steel with an anochrome finish, providing a sturdy metal track with a neutral metallic appearance.
Selecting The KV80 Standard For Your Shelving Run
KV80 standard duty shelf standard in the 80 ANO 72 size gives you a 72 inch, 16-gauge steel track with 1 inch bracket adjustment for Knape and Vogt systems using KV180, KV181, KV160, or KV179 series brackets. The 5/8 inch wide by 13/32 inch deep profile and anochrome finish support clean-looking closet, pantry, or workshop shelving layouts where consistent bracket spacing and a known standard-duty track are important. Use this KV80 model when your shelving design calls for a tall, wall mounted standard that matches these specific Knape and Vogt bracket series and adjustment details.
