Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV80 standard-duty shelf standard is a 96 inch vertical track that supports adjustable shelving when paired with matching brackets, so installers can build full-height storage runs with a single continuous standard. This Knape and Vogt standard is typically used with KV180, KV181, KV160 or KV179 series brackets, tying directly into a proven bracket family for straightforward layout on closet or garage jobs. The standard measures 5/8 inch wide by 13/32 inch deep, so it fits neatly on cabinet sides or wall cleats without taking excessive space. Material is 16-gauge steel, giving the standard a solid feel for everyday shelf loads in residential or light commercial storage. The anochrome finish provides a neutral metallic appearance that blends with many shelf and wall colors, helping finished installations look consistent across multiple bays.
This KV80 standard has screw holes spaced 12 inches apart on center, which sets a repeating fastening rhythm along the 96 inch length for secure attachment to studs or backing. The 5/8 inch wide by 13/32 inch deep profile allows the standard to sit close to the mounting surface, keeping brackets tight to the wall plane for a clean finished look. The adjustable in 1 inch increments slot pattern runs the full length, so installers can place brackets at predictable heights without measuring from scratch each time. Recommended fasteners are KV80-80 screws (sold separately), aligning the screw choice with the standard design for consistent seating in the pre-formed holes.
This 96 inch KV80 standard suits full-height closet, pantry, or garage wall installations where continuous adjustment from low to high shelves is needed. Its typical use with KV180, KV181, KV160 or KV179 series brackets ties the vertical track directly to those bracket families, which is helpful when matching existing layouts or expanding a known system. The 5/8 inch width lets the standard mount along cabinet sides or wall panels without significantly reducing usable shelf width. At 13/32 inch deep, the track stays fairly low profile, which keeps shelving closer to the wall surface so hanging garments or stored items use space efficiently. Available lengths across the wider KV80 line include 12, 18, 24, 36, 48, 60, 72, 84 and 96 inches, giving planners a consistent standard geometry for both shorter and taller sections within the same project.
The adjustable in 1 inch increments feature means every bracket position falls on a simple grid, helping installers repeat shelf heights across bays without complex layout. When multiple KV80 standards are set side by side, the 1 inch increment pattern allows shelves to transfer across sections and still sit level. Screw holes spaced 12 inches on center give a predictable fastening layout that pairs well with common framing intervals, so the standard can track structurally supported points along the wall. The 16-gauge steel material resists bending under typical shelf bracket engagement, supporting repeated repositioning over time without deforming the slot pattern. The anochrome finish provides a neutral tone that works with common closet and garage colors, which is useful when combining these standards with KV brackets available in similar finishes across a project.
The KV80 standard-duty shelf standard is typically used with KV180, KV181, KV160 or KV179 series brackets, which gives a matched track-and-bracket fit for adjustable shelving.
This KV80 anochrome shelf standard is 96 inches long, allowing installers to run shelving from low positions up toward ceiling height in many closet or garage layouts.
The KV80 shelf standard measures 5/8 inch wide by 13/32 inch deep, which keeps the track slim so shelves sit close to the wall while still engaging the bracket slots.
The KV80 standard is adjustable in 1 inch increments, so brackets can be repositioned on a 1 inch grid to fine-tune shelf spacing as storage needs change.
The KV80 shelf standard is made from 16-gauge steel with an anochrome finish, giving a sturdy metal track with a neutral metallic appearance for storage installations.
The KV80 standard lists KV80-80 screws (sold separately) as the recommended fasteners, tying the screw choice to the pre-formed hole pattern for reliable mounting.
The 96 inch KV80 standard-duty shelf standard in anochrome finish combines a 5/8 inch wide by 13/32 inch deep profile with 1 inch adjustment increments and 12 inch on-center screw holes, giving installers a predictable track for tall adjustable shelving runs. Its typical use with KV180, KV181, KV160 or KV179 series brackets anchors this standard in a well-known Knape and Vogt system, helpful when matching or extending existing storage layouts. Selecting this 80 ANO 96 model aligns length, finish, and bracket family so closet, pantry, or garage projects share a consistent structure from floor to upper shelves.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 50 Each |  KV80-80ZC Mfr# 80-80 ZC | 1-1/2" KV80 Screw, Zinc Finish 50/Bag |
