Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18 inch KV180 shelf bracket from Knape and Vogt is a regular-duty steel shelf bracket in an anochrome finish, so it supports typical storage loads while matching standard closet and shelving systems. The bracket is identified as KV Model KV180 and is typically used with KV80 standards, which sets it up for straightforward planning when laying out shelves. This specific bracket length is 18 inches, fitting layouts that need deeper shelving in closets, garages, or general storage runs where more shelf depth is required. The anochrome finish gives a neutral, metallic look that ties in cleanly with common standards and other organizational hardware. The bracket is part of a regular-duty line with a stated weight rating of 120-320 lb per pair based on length, so each length in the series has a defined capacity range for load planning. The design is Made in USA, which matters for projects that specify domestic manufacturing in their hardware schedule.
This KV180 regular-duty shelf bracket is described as typically used with KV80 standards, so the tooth spacing and profile are shaped for that Knape and Vogt standard style. Two engagement teeth on the bracket interface with the standard slots, giving a multi-point connection that helps keep the bracket seated when shelving is loaded or adjusted. The formed shelf lip at the outer end of the bracket gives a physical stop that works with common shelf materials, helping the shelf bear on the bracket without sliding off the front edge. Within the overall KV180 series, the use of 16-gauge steel on shorter lengths and 14-gauge steel on 14-20 inch lengths shows that longer spans receive heavier material, which supports fit and performance on deeper shelving runs paired with the same standards.
The 18 inch KV180 regular-duty shelf bracket fits applications needing deeper shelving while staying within a steel standards-and-brackets system. Because the KV180 model is typically used with KV80 standards, it fits planned layouts using Knape and Vogt vertical standards for adjustable shelving in closets, garages, or utility areas. The 18 inch length sits toward the deeper end of the KV180 range, which covers 4 through 20 inch lengths, so it pairs well with wider shelves where extra projection is required for storage bins or folded goods. Within this family, available finishes such as anochrome, almond, black, brass look, brown, and white let the installation match visible hardware to the surrounding cabinetry or wall system while maintaining the same load characteristics and engagement design. The anochrome finish on this bracket provides a neutral tone that works with many standard components.
The stated weight rating of 120-320 lb per pair, based on length, gives installers and designers a clear capacity reference when spacing standards and selecting shelf materials, so storage layouts can be planned around predictable bracket performance. The use of 16-gauge steel on KV180 brackets from 4-12 inches and 14-gauge steel from 14-20 inches means the longer brackets gain heavier material, supporting the higher moments created by deeper shelves. Two engagement teeth on each bracket fasten to the standard, providing a secure connection that is less prone to dislodging during loading or when shelves are repositioned. A shelf lip formed at the bracket end adds a functional stop that helps keep the shelf panel aligned on the bracket arms, which can reduce shifting over time. The fact that these brackets are made in USA supports specifications that call for domestic hardware while keeping geometry and performance consistent across projects and repeat installations in the same facility.
The KV180 regular-duty shelf bracket is typically used with KV80 standards, so pairing those components keeps the engagement teeth and standard slots matched for adjustable shelving layouts.
This specific Knape and Vogt KV180 bracket is 18 inches long, fitting deeper shelf designs where additional projection is needed compared to shorter brackets in the same series.
The KV180 bracket line has a stated weight rating of 120-320 lb per pair, based on length, which guides how heavily each bracket pair can be loaded in shelving runs.
KV180 brackets in 4-12 inch lengths use 16-gauge steel, while 14-20 inch lengths use 14-gauge steel, so longer brackets benefit from heavier stock to support deeper shelves.
The KV180 bracket includes a shelf lip at the end, providing a small stop that helps keep the shelf panel located on the bracket and reduces forward movement during everyday use.
The KV180 shelf bracket is made in USA, which suits projects or specifications that call out domestically manufactured shelving hardware from a recognized supplier.
This 18 inch KV180 regular-duty shelf bracket in anochrome finish from Knape and Vogt fits projects using KV80 standards where a deeper shelf projection is required. With a defined 120-320 lb per pair weight rating across the KV180 series and steel construction that shifts from 16-gauge on shorter lengths to 14-gauge on longer sizes, it supports planned loads in adjustable shelving systems. Two engagement teeth and a formed shelf lip contribute to secure shelf seating during use. When a job calls for made in USA standards-and-brackets hardware with coordinated finishes across multiple shelf depths, this KV180 bracket aligns with that requirement.
Sold In: 100 Each
