Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV80 shelf standard is a 60 inch Knape and Vogt regular-duty standard that provides the vertical track for adjustable shelving in closets, cabinets, and storage runs. The 5/8 inch wide by 13/32 inch deep profile sets a compact footprint, which helps layout work in narrow stiles or tight closet walls. The anochrome finish gives the steel standard a neutral, job-site friendly appearance that blends with typical closet and cabinet interiors. This KV Model KV80 standard is typically used with KV180, KV181, KV160 or KV179 series brackets, so matching these parts keeps bracket seating consistent along the run. The 16-gauge steel construction gives the standard a solid feel during bracket engagement, which matters when installers adjust loaded shelves. Adjustable in 1 inch increments, the standard offers predictable slot spacing that simplifies bracket height layout and repeatable hole positioning across multiple bays.
The KV80 regular-duty shelf standard uses screw mounting, and the screw holes spaced 12 inches on center guide fastening locations, which keeps attachment points evenly distributed along the 60 inch length. This spacing helps installers tie into studs or cabinet structure while maintaining a consistent pattern across multiple standards in a run. The 5/8 inch wide x 13/32 inch deep profile sets the reveal against cabinet sides or wall surfaces, which aids alignment when installing paired standards for a shelf. The standard is adjustable in 1 inch increments, so once standards are mounted plumb, bracket positions repeat at the same heights from bay to bay. Recommended KV80-80 screws are sold separately, which keeps the fastening choice aligned with the manufacturers mounting pattern.
This 60 inch KV80 regular-duty shelf standard fits closet, cabinet, and garage organization layouts where a continuous vertical track is needed for adjustable shelves. The 5/8 inch wide x 13/32 inch deep size suits side walls of tall cabinets and closet partitions, allowing the track to sit close to the surface without demanding excessive clearance. Because it is typically used with KV180, KV181, KV160 or KV179 series brackets, the standard lines up with common Knape and Vogt shelving hardware already used in many shop and field builds. The 1 inch adjustment increments create an easy-to-understand pattern for homeowners and facility staff, so they can relocate shelves without rethinking layout spacing. The anochrome finish coordinates with common closet hardware colors, which keeps the track visually controlled when installed in open-shelf applications.
The 16-gauge steel material gives the KV80 shelf standard a sturdy track for bracket engagement, which supports repeatable shelf positioning when loads are added or redistributed. Screw holes spaced 12 inches on center define a clear fastening rhythm, helping installers keep standards straight and aligned across long walls. Adjustable in 1 inch increments, the standard delivers predictable shelf moves, allowing brackets on opposing standards to stay level without extra measuring each time. The 60 inch length reduces joints in tall layouts, which can cut down on alignment challenges between stacked sections. Typical pairing with KV180, KV181, KV160 or KV179 series brackets focuses the hardware choice, so the bracket hooks seat cleanly in the slots designed for this model. The anochrome finish on 16-gauge steel combines a neutral appearance with a smooth surface, which aids in sliding brackets in and out of the slots during reconfiguration.
The 60 inch KV80 shelf standard runs 5 feet vertically, which supports tall shelving layouts in closets or cabinets without needing multiple shorter standards.
The KV80 shelf standard is typically used with KV180, KV181, KV160 or KV179 series brackets, so matching these series keeps bracket seating consistent along the track.
The KV80 shelf standard has screw holes spaced 12 inches on center, giving installers a regular fastening pattern for studs or cabinet structure.
The KV80 shelf standard is made from 16-gauge steel, which provides a rigid track for brackets in regular-duty shelving applications.
The KV80 shelf standard is adjustable in 1 inch increments, creating a simple height grid that keeps opposing brackets aligned during shelf changes.
The 60 inch KV80 shelf standard has an anochrome finish, giving it a neutral look that blends with typical closet and cabinet interiors.
This 60 inch Knape and Vogt KV80 regular-duty shelf standard in anochrome finish offers 1 inch adjustable slots, a 5/8 inch wide x 13/32 inch deep profile, and screw holes 12 inches on center. For projects needing a continuous 5 foot track that works with KV180, KV181, KV160 or KV179 series brackets, this KV80 shelf standard provides a defined mounting pattern and familiar adjustment spacing for straightforward layout and repeatable shelf positioning.
Sold In: 1 Each
