Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Standard Duty Shelf Brackets Single Slotted describes Knape and Vogt KV180 steel brackets engineered for use on single-slotted standards so you can build adjustable shelving runs with matching parts. This 6 foot shelf bracket in anochrome finish ties directly to the KV180 model family, giving installers a known pattern when laying out storage or closet runs that rely on the same geometry across multiple lengths. The bracket design uses a shelf lip at the end, which helps keep shelf material located on the bracket, valuable when setting wood or laminate shelving in long rows. The KV180 bracket line is made in the USA, which provides consistent production for repetitive commercial or residential projects using the same standards and brackets.
The 180BP ANO 6 bracket design uses two engagement teeth to connect to the standard, so the bracket positively locks into the standard slots when loaded properly. The KV180 series carries a weight rating of 120 to 320 pounds per pair, depending on bracket length, so installers can plan shelf spacing and load expectations around those published ranges. Material thickness shifts from 16-gauge steel in 4 to 12 inch lengths to 14-gauge steel in 14 to 20 inch lengths, matching heavier sections to longer projections where bending forces increase.
The KV model KV180 shelf bracket is typically used with KV80 standards, tying brackets and standards into a coordinated single-slotted system for closets, garages, and general storage. Available lengths of 4, 6, 8, 10, 12, 14, 16, 18, and 20 inches let builders create shallow upper shelves and deeper lower shelves while staying within the same bracket line. Multiple finish choices - anochrome, almond, black, brass look, brown, and white, plus titanium as a special order - allow visual coordination with shelving, closet rods, or nearby casework. The shelf lip at the end of the KV180 bracket gives an edge that can support wood or panel shelving at the front, which is practical when setting up rows of adjustable shelves that may be repositioned over time in residential or commercial storage.
The shelf bracket weight rating of 120 to 320 pounds per pair, based on length, provides a clear load guideline when choosing bracket size for expected storage loads along a wall. The shift from 16-gauge steel in 4 through 12 inch lengths to 14-gauge steel in 14 through 20 inch lengths aligns heavier steel with longer brackets, helping the system handle increased bending moments at deeper shelf projections. The two engagement teeth that fasten the bracket to the standard help maintain alignment and resist accidental lift-out when stocking shelves. The made in USA production of the KV180 bracket line supports consistent dimensions across orders, which matters when a project uses many brackets and standards in long continuous rows.
The 180BP ANO 6 bracket is part of the Knape and Vogt KV180 model line, which lets installers match it with other KV180 lengths on the same project.
The KV180 bracket uses two engagement teeth to fasten to the standard, which helps keep the bracket seated in the slots under normal loading.
The KV180 bracket is typically used with KV80 standards, so both parts work together as a coordinated single-slotted shelving system.
KV180 brackets have a weight rating of 120 to 320 pounds per pair, based on length, which guides shelf depth choices for expected loads.
KV180 brackets use 16-gauge steel from 4 to 12 inches and 14-gauge steel from 14 to 20 inches, matching heavier material to longer bracket projections.
The KV180 shelf lip at the end of the bracket provides a front edge support, helping position shelf panels consistently along a shelving run.
The Knape and Vogt 180BP ANO 6 KV180 shelf bracket combines a defined weight rating, steel gauges matched to length, and a shelf lip detail to support straightforward shelving layouts. By working within the KV180 system and typically pairing with KV80 standards, installers can plan bracket lengths, finishes, and loads in advance and repeat that setup across multiple closets, garages, or storage projects.
Sold In: 100 Each
