Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
36 inch KV80 shelf standard defines the vertical track for adjustable shelving in closet, garage, and storage layouts where precise bracket positioning matters. This Knape and Vogt standard-duty upright is part of the KV80 system, so it aligns with typical shop and job-site expectations for this line. The anochrome finish identifies this specific version visually in a run of mixed finishes and supports a clean, neutral look across a wall of standards. The 36 inch length suits shorter runs, base sections, or segmented layouts where a full-height standard is not needed, giving flexibility when laying out rows between obstructions. A 5/8 inch width and 13/32 inch depth set a compact profile, helping the standard sit close to the wall while still giving a solid track for brackets. The 16-gauge steel construction gives a sturdy base for the designated standard-duty brackets in the KV80 family.
This Knape and Vogt KV80 standard uses screw holes spaced 12 inches on center, which establishes a predictable fastening rhythm along the 36 inch length. That spacing helps align fasteners with common framing intervals in many wall conditions and keeps each upright secured at multiple points. The 5/8 inch width gives enough bearing surface for fasteners while still fitting between tight obstacles, supporting clean vertical alignment in narrow stud bays. With adjustment slots laid out in 1 inch increments, each mounted standard lets you move brackets in full-inch steps without re-drilling or shifting the upright. The 13/32 inch depth keeps the profile relatively shallow, so shelves and brackets can sit close to the wall while the standard remains fully supported. Together, the fixed hole spacing and incremental adjustment simplify planning when aligning several KV80 standards in a row.
The manufacturer part number 80 ANO 36 identifies this specific 36 inch anochrome variant within the KV80 family, which is useful when matching existing installations or specifying repeats on a project. Available KV80 lengths span from 12 inches to 96 inches, so the 36 inch size sits in the mid range and suits wall sections under windows, over benches, or between obstructions where taller standards would interfere. In closet layouts, this length can serve shorter hanging or shoe sections, tying into longer uprights elsewhere while keeping slot spacing consistent. In garage and utility spaces, the 36 inch run can handle lower tool, bin, or parts shelving while longer KV80 standards carry taller storage above. Because the KV80 model is typically used with KV180, KV181, KV160, or KV179 brackets, the same 1 inch incremental pattern continues across all these lengths, helping different sections share common shelf elevations.
The 5/8 inch width and 13/32 inch depth of the KV80 profile define a consistent footprint along the entire product line, which helps jigs, templates, and layout marks carry over from one length to another. Installers working across several walls can rely on the same bracket engagement and shelf setback, reducing rework when swapping between 36 inch and longer standards. The 1 inch adjustment increments lock shelf locations into whole-number measurements, which simplifies drawing, cutting, and communicating elevations on shop drawings or change notes. Screw holes at 12 inches on center provide predictable anchor locations, allowing repeated use of the same drilling pattern when laying out multiple standards across studs or blocking. The anochrome finish clearly designates this version relative to almond, black, brass look, brown, and white options within the same KV80 range, which helps keep finish schedules consistent on jobs that mix colors across different areas.
The 80 ANO 36 is a Knape and Vogt KV80 standard-duty shelf standard, so it acts as the vertical track that supports adjustable shelf brackets in a KV80-based system.
The Knape and Vogt KV80 standard has a 36 inch length, which suits mid-height closet or garage sections and wall areas where full-height uprights are not required.
This KV80 shelf standard is typically used with KV180, KV181, KV160, or KV179 series brackets, keeping bracket engagement consistent across adjustable shelf locations.
The KV80 profile measures 5/8 inch wide by 13/32 inch deep, giving a slim wall-mounted track that still provides adequate bearing area for brackets and fasteners.
This KV80 standard is adjustable in 1 inch increments, so shelf brackets can be repositioned in full-inch steps to align multiple shelves at consistent elevations.
The 36 inch KV80 standard has screw holes spaced 12 inches on center, which provides multiple anchor points along the upright to support the installed shelving load.
The Knape and Vogt 36 inch KV80 standard-duty shelf standard in anochrome finish gives a defined 5/8 inch by 13/32 inch profile, 1 inch adjustment increments, and 12 inch on-center screw holes. Those details support predictable layout, bracket alignment, and fastening across closet, garage, and storage projects using KV180, KV181, KV160, or KV179 brackets. When a mid-length upright matches your wall height and elevation plan, this 80 ANO 36 version aligns with the broader KV80 system so multiple standards can be combined into a consistent adjustable shelving run.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 50 Each |  KV80-80ZC Mfr# 80-80 ZC | 1-1/2" KV80 Screw, Zinc Finish 50/Bag |
