
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
KV80 screw is a Knape and Vogt fastener designed for use with KV70 and KV80 series standards, so it ties directly into typical shelf standard layouts in closets, storage, and utility runs. The screws are 1-1/2 inch long, which gives solid bite into typical wall or framing materials for shelf standard anchoring. Each screw has a #8 body, so the shank has the strength for repeated loading when standards support shelf brackets. The #6 head with Phillips drive lets the screw seat neatly in standard slots while still working with common Phillips drivers on site. The zinc finish provides a clean, neutral appearance that complements typical metal standards while offering surface protection in normal indoor environments. The manufacturer part number 80-80 ZC clearly identifies this version for straightforward reordering alongside KV70 and KV80 standards.
The KV Model KV80-80 designation confirms that this screw is for use with KV70 and KV80 series standards, so it fits directly into the mounting pattern those standards expect. With a 1-1/2 inch length, the screw penetrates through the standard, wall surfacing, and into backing depth that supports sustained loading. The #8 body provides the bearing area in the wall, while the #6 Phillips head sits closer to the standard face, helping minimize interference with shelves and brackets. This combination of body and head sizing helps standards mount securely while maintaining a low-profile head in the standard slot. The zinc finish also suits typical indoor shelf and closet locations where metal shelf standards are used with matching screws.
The KV80-80 screw is specified for use with KV70 and KV80 series standards, so it fits directly into projects that rely on these Knape and Vogt shelf systems. In shelf, closet, and garage organization layouts that use metal shelf standards, the 1-1/2 inch length allows each screw to pass through the standard and into framing or anchors for a solid connection. The #8 body gives the wall side grip that supports loaded brackets, while the #6 Phillips head matches the profile and drive pattern common to shelf standards. Because the screw is identified under manufacturer part number 80-80 ZC with a zinc finish, it aligns with metal hardware where a bright metal fastener suits the visual line of vertical standards.
The combination of #8 body and #6 head on this KV80 screw helps installers balance holding power with a smaller head that sits comfortably in standard slots, which supports straighter standard alignment and smoother bracket seating. The Phillips head pattern works with widely used drivers, helping maintain a steady workflow when driving multiple fasteners along KV70 or KV80 series standards. The 1-1/2 inch screw length standardizes penetration depth across an installation, which supports repeatable anchoring where each standard is fastened at multiple points along the wall. By matching the KV Model KV80-80 designation and the 80-80 ZC part number, the screw lines up with the hardware schedule for KV70 and KV80 standards, which simplifies reordering and keeps product choices consistent across projects using shelf, closet, and garage organization runs.
The KV80-80 screw is for use with KV70 and KV80 series standards, so it fits installations built around those Knape and Vogt shelf standard systems.
The Knape and Vogt KV80 screw is 1-1/2 inch long, which lets it pass through the standard and wall material into backing or anchors for shelf support.
This KV80 screw has a #8 body and a #6 head, so the shank carries the load while the smaller head seats neatly in the shelf standard slot.
The KV80-80 screw uses a Phillips head, allowing installers to use common Phillips drivers when fastening KV70 and KV80 series standards.
The 80-80 ZC screw has a zinc finish, giving the fastener a bright metal appearance that aligns with typical metal shelf standards.
This KV80 screw is identified as KV Model KV80-80 and manufacturer part number 80-80 ZC, so installers can match it to KV70 and KV80 projects.
The KV80-80 screw from Knape and Vogt ties directly to KV70 and KV80 series standards, so it aligns with established shelf, closet, and garage organization layouts. With a 1-1/2 inch length, #8 body, #6 Phillips head, and zinc finish, it suits typical indoor shelf standard applications where consistent mounting and matching hardware are important. Use the KV80-80 model and 80-80 ZC part number when specifying or replenishing screws for projects that rely on these KV shelf standards through Wurth Baer Supply.
Sold In: 50 Each