24" KV80 Standard-Duty Shelf Standard, Anochrome Finish

24 Inch KV80 Shelf Standard For Adjustable Runs

24 inch KV80 shelf standard gives you a standard-duty upright for building adjustable shelving runs where predictable support spacing matters. Knape and Vogt 80 ANO 24 uses the KV Model KV80 pattern, so it works with the specified KV180, KV181, KV160 or KV179 series brackets to create matched uprights and brackets across a project. The 24 inch length lets you lay out short bay sections in closets, cabinets, or garage organizing runs without cutting, which helps keep installation repeatable on multiple openings. An anochrome finish provides a neutral, job-site friendly look that works alongside common hardware finishes, so shelving layouts can run through mixed-use spaces without drawing attention to the standards.

Key Details That Support Straightforward Layouts

• The KV Model KV80 design is typically used with KV180, KV181, KV160 or KV179 series brackets, so the bracket interface is already defined and you can repeat the same hardware family from opening to opening.
• The 24 inch length suits shorter uprights in cabinets, low closets and garage sections, which helps when you need consistent shelf spacing but do not want long standards hanging below the lowest shelf.
• The standard is 5/8 inch wide, allowing narrow face-frame or panel margins, so you can position standards close to edges without crowding adjacent components on built-ins.
• The 13/32 inch depth keeps the standard relatively low profile, so it sits close to the panel surface and helps keep cabinet interior space focused on usable shelf depth.
• Construction from 16-gauge steel gives the standard a sturdy feel for typical shelf loads in closets and storage projects, so you can plan runs knowing the uprights are built from a consistent material thickness.
• Available finishes for the KV80 line include anochrome, almond, black, brass look, brown and white, so you can match standards to the visual expectations of the room or cabinet interior when coordinating multiple lengths.

Mounting And Hole Pattern Details For KV80

The KV Model KV80 shelf standard uses adjustment slots set in 1 inch increments, which lets you plan shelf locations on a simple 1 inch grid across multiple bays. Screw holes are spaced 12 inches apart on center along the standard, giving you a predictable fastening pattern when tying back to studs or cabinet panels. The recommended fasteners are KV80-80 screws (sold separately), so the screw choice is already identified for use with this upright pattern on wood or similar substrates.

Using This KV80 Standard In Real Projects

Where This 24 Inch KV80 Standard Fits Best

This 24 inch KV80 standard from Knape and Vogt sits in the shelf, closet and garage organization category, under shelf standards and brackets, so it is oriented toward adjustable storage layouts rather than fixed shelving. The 5/8 inch width and 13/32 inch depth work well in cabinet interiors where space is tight and panels may be relatively thin, letting you run standards vertically without dominating side walls. Within a larger system, the KV Model KV80 designation ties this upright to KV180, KV181, KV160 or KV179 series brackets, so you design around a single bracket family for shelves across closets, wall units and garage storage. Available lengths in the same model range from 12 inches through 96 inches, which means this 24 inch length can be mixed with longer or shorter KV80 standards to keep bracket spacing consistent from floor to ceiling or across varying cabinet heights on the same job.

How KV80 Details Help Repeatable Shelf Layouts

Adjustment in 1 inch increments lets you pick shelf heights on a simple whole-number schedule, which is useful when aligning multiple openings or when you need to coordinate shelf clearances with stored items that vary in height. Screw holes spaced 12 inches apart on center provide a regular fastening rhythm, so you can plan for fasteners at predictable locations along wall studs or cabinet sides. The 16-gauge steel construction keeps the standard consistent with other KV80 pieces in the line, which helps maintain uniform performance across installations using different lengths. The anochrome finish gives a clean, neutral appearance within the list of available finishes for the KV80 family, so you can treat this 24 inch upright as part of a coordinated finish scheme across a project that might also use almond, black, brass look, brown or white standards in other areas.

Common Questions About The KV80 24 Inch Standard

Selecting This KV80 Standard For Your Layout

The 24 inch KV80 standard, Knape and Vogt part 80 ANO 24, brings a 5/8 inch by 13/32 inch 16-gauge steel upright, anochrome finish, 1 inch adjustment increments and 12 inch on-center screw holes, giving you predictable geometry for adjustable shelf runs.