A Metal Drawer System Built for White-Interior Cabinetry

The Grass Zargen 6236 is a complete drawer side and slide kit sized at 20-1/16 inches nominal length with a 5-7/8 inch side height, finished in White Epoxy for a clean match inside painted and white-laminate cabinets. This metal drawer system integrates the running gear into the side profile, so the structural box and the slide arrive as one coordinated package rather than separate parts to reconcile.

Key Features

• 100 lb weight capacity per the rated Zargen system, handling everyday kitchen and storage loads with a clear working number.
• 3/4 extension opens the drawer most of the way out — suited to storage where occasional rear access is acceptable rather than a full pull-out.
• 5-7/8 inch side height provides a taller profile for pots, pantry goods, and deep storage without moving to a full-height gallery rail.
• 20-1/16 inch nominal length fits standard cabinet depths in the Zargen line; all components for this nominal length work together as a set.
• White Epoxy finish coordinates with white painted interiors and light-colored melamine drawer fronts for a consistent interior appearance.
• Metal construction replaces wood drawer sides with a formed steel profile that carries the load and integrates the runner in one wall.

Where This System Fits in the Build

A metal drawer system is not a slide paired with a separate box — the steel side profile is the structural drawer wall, and the runner is engineered into it. That means one ordering decision covers both the box and the motion. The Zargen 6236 at this nominal length suits standard base cabinet depths where a 20-inch drawer footprint is the target. The 3/4 extension brings most of the drawer contents to the front of the cabinet face, which works well in pantry pull-outs, pot drawers, and utility storage where reaching to the back occasionally is not a problem. Shops that need complete access to the rear of every drawer should look at a full-extension system instead — 3/4 extension is the right trade-off when budget and adequate daily function are both priorities.

Finish and Construction Details

The White Epoxy coating on the Zargen side profile is a practical match for the dominant interior finish in painted kitchen and bathroom cabinetry. It reads cleanly against white drawer fronts and light melamine without the visual contrast that a zinc or silver profile creates. The metal construction gives the box structural rigidity that wood drawer sides of the same height cannot always match, and the integrated runner eliminates the alignment step of fitting a separate slide to a separately built box. The drawer bottom, back, and front are shop-supplied to the system's published cutting dimensions; the Zargen system specifies those numbers, and building to spec is what ensures the hardware seats correctly.

Who Orders the Zargen 6236 in This Configuration

Cabinet shops running production kitchens in white reach for this configuration when the interior finish and the daily workflow both matter. The 5-7/8 inch side height covers a broad range of kitchen drawer uses — from cutlery and utensil drawers to mid-depth pot storage — without requiring the additional step of adding gallery railing for retained contents. Designers specifying handle-less or low-profile kitchen interiors in white get a system side that disappears behind the front rather than creating a visible contrast at the drawer opening. Contractors working through a batch of frameless base cabinets in a consistent finish find a single nominal length and finish simplifies ordering across the run.

The Right White System for the Job at Hand

When the interior spec calls for white and the drawer depth lands at 20 inches, the Zargen 6236 in this configuration removes two sourcing problems at once — the box and the slide — and delivers a finish that holds up behind painted fronts and white melamine without a color mismatch at the drawer opening.