Zargen 6236 Drawer Slide with 100lb Capacity, 3/4 Extension, 6", White Epoxy, 22
Description
Zargen 6236 Drawer Slide For Fast Assembly
Zargen 6236 drawer slide with 100lb capacity, 3/4 extension, 6 inch length and white epoxy finish defines this Grass America metal drawer side system, so installers get a matched slide and side panel that speeds drawer construction. The Zargen integrated Euro drawer slide and metal side panel system is described as cost effective, which translates into fewer separate components to handle on the bench. Automatic production capable design means this system supports high-throughput cabinet shops that repeat the same setup all day. The cabinet member design allows for use in 32mm cabinet construction, so it aligns with line-bored cases without layout gymnastics. Cabinet maker provides drawer front, rear drawer panel and drawer bottom, keeping shop work focused on parts normally cut and machined. Drawer material thickness is 1.3mm in a white epoxy finish, giving a consistent, clean interior surface that matches modern casework.
Key Grass Zargen Drawer System Advantages
- The Zargen integrated Euro drawer slide and metal side panel system reduces the number of steps required to make a drawer, which shortens assembly time on every box.
- Automatic production capable construction supports jigs and machinery in volume shops, helping maintain repeatable drawer geometry from run to run.
- Built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, which helps fronts sit flush without constant adjustment by the installer.
- The system allows for drawer fronts to be easily adjusted in height, side-to-side and angle, so installers can fine-tune reveals after mounting.
- Standard system is 7/8 extension, and using item number GF6200 the slide system becomes fully extendable, allowing longer access without rebuilding existing drawers.
Installation And 32mm Cabinet Fit Details
The cabinet member design allows for use in 32mm cabinet construction, so hole patterns line up with standard system boring and speed up case drilling. The system allows for drawer fronts to be easily adjusted in three ways - height adjustment plus or minus 2mm, side-to-side adjustment plus or minus 1.5mm and angle adjustment plus or minus 1mm - which gives enough range to align tight reveals on frameless cabinets. Standard system is 7/8 extension, so the drawer projects far enough for everyday access while keeping runners protected inside the cabinet. Using item number GF6200, the slide system becomes fully extendable and existing drawers do not have to be altered, which matters when increasing access on installed kitchens or casework.
Using This Integrated Euro Drawer System On Jobs
Where This Grass America Drawer System Fits Best
The Zargen integrated Euro drawer slide and metal side panel system is positioned for cabinet makers who want drawer assembly in about two minutes, which supports both one-off custom jobs and production lines. Cabinet member design allows for use in 32mm cabinet construction, so it fits well with frameless European-style kitchen and bath cabinets that rely on system holes. Cabinet maker provides drawer front, rear drawer panel and drawer bottom, meaning the metal side panels and slides define the drawer geometry while wood parts match the rest of the job. Drawer systems are available in five drawer side heights, including a 5-7/8 inch side, so builders can match depth to contents and cabinet design using the same hardware family.
Why Zargen 6236 Details Support Repeatable Results
Drawer material thickness is 1.3mm and is in a white epoxy finish, which creates uniform side panels that track smoothly in the runners and present a consistent interior color across multiple cabinets. The system allows for drawer fronts to be easily adjusted in height, side-to-side and angle, so installers can dial in gaps without pulling the drawer apart. Built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, which helps drawers seat fully against their stops and keeps faces aligned after normal use. Standard system is 7/8 extension, giving predictable travel that matches cutout depths, while using item number GF6200 to make the slide system fully extendable keeps existing drawers intact as layouts change. Automatic production capable construction supports shops that depend on fixtures and NC drilling, so the same part number can run efficiently across many orders.
Common Questions About This Zargen 6236 Slide
What type of drawer system is the Zargen 6236 drawer slide?
The Zargen 6236 drawer slide is an integrated Euro drawer slide and metal side panel system, which means the runner and side wall form one unit for faster assembly.
How much weight can this Grass America drawer system handle?
This Grass America drawer system has a 100lb capacity, supporting typical kitchen, bath and casework drawer loads without changing to heavier hardware.
What drawer travel does this 3/4 extension Zargen drawer slide provide?
This Zargen 6236 slide is described with 3/4 extension and a standard 7/8 extension system, giving substantial access to drawer contents during everyday use.
How does the built in self closing feature help alignment?
The built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, pulling the front into a consistent seated position.
What adjustments are available on the drawer front?
The system allows for drawer front height adjustment plus or minus 2mm, side-to-side adjustment plus or minus 1.5mm and angle adjustment plus or minus 1mm for fine reveal control.
Can this integrated Euro drawer slide work with 32mm cabinet construction?
The cabinet member design allows for use in 32mm cabinet construction, aligning with system holes and simplifying installation layouts.
Select This Grass Zargen Slide For System Builds
This Grass Zargen drawer system with 100lb capacity, 3/4 extension and white epoxy 1.3mm metal sides provides a defined geometry that supports quick drawer assembly. Cabinet member design for 32mm cabinet construction and three-way front adjustment simplifies fitting in Euro-style casework. Built in self-closing feature that operates over 2-5/8 inches and the option to change to fully extendable travel using item number GF6200 give flexibility for different projects. For shops using Grass Zargen drawer systems, this Zargen 6236 drawer slide helps standardize hardware across multiple cabinet lines.
