Zargen 6236 Drawer Slide with 100lb Capacity, 3/4 Extension, 6", White Epoxy, 16

Zargen 6236 Drawer Slide For Fast Metal Drawers

Zargen 6236 drawer slide uses an integrated Euro drawer slide and metal side panel system that lets users assemble and install a drawer in two minutes, so cabinet shops can cut drawer construction time on repeat jobs. The system is automatic production capable, so it fits into line-boring and high-volume workflows without changing core cabinet processes. A cabinet member design allows for use in 32mm cabinet construction, giving precise, repeatable slide locations from standard system holes. The drawer material thickness is 1.3mm in a white epoxy finish, which provides a consistent metal side profile ready for edging and a clean interior look in light-colored cabinets. With a 100lb capacity rating and 3/4 extension, this 6 inch length slide supports typical small to medium utility drawers while controlling travel to protect contents. As part of the Grass Zargen Drawer System, it ties into a coordinated program of drawer side heights for layout flexibility.

Key Zargen 6236 Details That Speed Jobs

• The Zargen integrated Euro drawer slide and metal side panel system significantly reduces the number of steps required to make a drawer, which helps shops push more boxes through with less bench labor and handling.
• Automatic production capable construction lets the system run in line with drilling and cutting equipment, so drawer assembly can be built into a flow operation instead of one-off bench work.
• Cabinet member design for 32mm cabinet construction gives consistent mounting reference, which supports accurate installations across a full run of casework using standard hole patterns.
• The built in self-closing feature automatically closes the drawer within a range of 2-5/8 inches, which pulls fronts in consistently and helps maintain aligned faces on banks of drawers.
• The system allows drawer fronts to be adjusted in height, side-to-side, and angle, which lets installers fine tune gaps on site without reworking the drawer box or case.
• Drawer material thickness of 1.3mm with a white epoxy finish provides a sturdy metal side with a finished surface, which saves separate finishing steps on shop-made sides.

Mounting And Adjustment For Zargen 6236 Drawers

The cabinet member design of the Zargen 6236 system allows for use in 32mm cabinet construction, so installers can mount slides off pre-drilled system rows instead of laying out individual locations. The drawer front adjustment offers height adjustment of plus or minus 2mm, side-to-side adjustment of plus or minus 1.5mm, and angle adjustment of plus or minus 1mm, which lets the front be dialed in after the box is installed. This 3/4 extension configuration gives controlled travel that keeps the runner mechanics within the cabinet, which suits shorter 6 inch applications. A built in self-closing feature automatically pulls the drawer closed over the last 2-5/8 inches of travel, which helps fronts sit flush against the cabinet without extra effort.

Using The Grass Zargen Drawer Construction System

Where The Grass Zargen 6236 System Fits Best

The Zargen integrated Euro drawer slide and metal side panel system is part of the Grass Zargen Drawer System, so it is aimed at casework where speed and repeatability are critical. Cabinet makers provide the drawer front, rear drawer panel, and drawer bottom, while the system supplies the metal sides and running gear, which shifts work from joinery to panel processing. Drawer systems are available in multiple drawer side heights, including 5-7/8 inches, allowing shops to match side height to the load and interior layout. This 6 inch slide length with 3/4 extension works well for shallow or upper drawers that do not need full-depth access. The 100lb capacity supports residential and light commercial storage loads in those shallow drawers, keeping the runner choice aligned with typical contents and cabinet design.

Why Zargen 6236 Details Support Accurate Results

The Zargen 6236 system significantly reduces the number of steps required to make a drawer, which simplifies training and helps maintain consistency when multiple workers build drawers. Automatic production capable design means drawers can be built from cut-to-size fronts, rears, and bottoms without custom side machining, which reduces opportunities for error. The ability to adjust the drawer front in height, side-to-side, and angle lets installers correct minor case or drilling variation by moving the front instead of rebuilding components. Built in self-closing over the last 2-5/8 inches of travel brings fronts home to the same stop point, which helps maintain even reveals across banks of drawers over time. The standard system is 7/8 extension, and using item number GF6200 the slide system becomes fully extendable without altering existing drawers, which gives shops a path to change access characteristics later while keeping the original drawer box investment.

Common Zargen 6236 Drawer Slide Questions

Selecting This Zargen 6236 Slide For Your Work

The Zargen 6236 drawer slide with 100lb capacity, 3/4 extension, and 6 inch length gives cabinetmakers a metal-sided drawer solution that ties directly into 32mm cabinet construction. Its integrated Euro drawer slide and metal side panel system lets users assemble and install a drawer in two minutes, which supports high-throughput shops. With built in self-closing and three-way front adjustment, it helps produce clean, aligned drawer banks from standard casework. For projects built around the Grass Zargen Drawer System and white epoxy metal sides, this part number 22909-03 offers a defined way to standardize a shallow drawer run.