Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand cabinet member from Grass America's 6600 series — a 22-1/2 inch (570mm nominal), white epoxy-coated, side-mount roller slide component that mounts to the cabinet interior on one side of the drawer. It is sold as a single handed member, not a complete slide set.
Cabinet shops and production installers often stock members separately rather than buying complete sets — it lets you replace a single damaged profile, balance left-hand and right-hand inventory independently, or run a large batch without over-ordering. This right-hand cabinet member is the part that fastens to the cabinet wall and carries the drawer member as the box rolls in and out. It belongs in traditional kitchen cabinetry, bathroom vanities, closet systems, and any other white-interior application where the slide needs to stay visually quiet. The white epoxy is specifically chosen for those interiors: it blends rather than contrasts, which is exactly the point of an epoxy color finish on a roller slide.
The 6600 cabinet member is formed steel with an epoxy powder-coat finish baked on for a durable, even surface. Grass America manufactures the 6600 series in the USA. The nylon roller bearings run quietly under load and hold up through repeated daily cycles in residential and light commercial cabinetry. At 570mm (22-1/2 inches), this member suits standard 22 inch drawer configurations. The 6600 series is designed for drawer material from 12.7mm (1/2 inch) up to 19mm (3/4 inch) thick, and the Grass formula for drawer width is inside cabinet width minus 25.4mm (1 inch) — apply that before cutting the box.
This listing is for buyers who already understand member-level ordering: cabinet shops running production lines, installers sourcing replacements for a specific side, and distributors stocking components for service calls. If you are outfitting a single drawer from scratch and want everything in one line item, look for the Grass 6600 complete slide set in the same series and length. If you need the left-hand version to match this member, order the corresponding left-hand cabinet member — two right-hand pieces will not make a working set. You will also need both drawer members, sold separately, to complete the installation.
The Motion Technology for this SKU is listed as Standard, meaning no self-closing ramp, soft-close damper, or detent is built in. The drawer will stay wherever it is left. Note that the Grass 6600 series is also available in self-closing versions — confirm the model before ordering if a closing ramp is needed.
One drawer requires four members total: one left-hand cabinet member, one right-hand cabinet member (this part), and two matching drawer members. All four must come from the same Grass 6600 series and the same nominal length — members from the 6610 or other series are not interchangeable.
Yes, but face-frame installations require rear mounting sockets to support the back end of the slide. Those sockets are series-specific to the Grass 6600 and sold separately. Without them, the rear of the slide is unsupported in a face-frame box.
Use the Grass formula: drawer width equals inside cabinet width minus 25.4mm (1 inch), leaving 1/2 inch of clearance per side. The drawer side material should be between 12.7mm (1/2 inch) and 19mm (3/4 inch) thick.
Stocking the right-hand cabinet member on its own keeps your production line moving without tying up inventory in complete sets you may not need — white finish included for interiors where the hardware should blend, not show.
Sold In: 100 Each
