Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand drawer member of Grass America's 6600 series epoxy-coated Euro slide — a 22-1/2 inch (570mm nominal), white, 3/4-extension roller slide component sold as a single handed piece. It is designed for the production shops and installers who stock members individually to control quantity and reduce waste across multi-drawer runs.
This left-hand drawer member is one of four components a single 6600-series drawer requires. To complete the set, you also need a right-hand drawer member and a matching left-hand and right-hand cabinet member — all from the Grass 6600 series, all in the same length. Members from other Grass series or other brands will not interchange. Two left-hand drawer members do not make a working pair. The 6600 series drawer member mounts to the bottom edge of the drawer side and rides inside its matching cabinet member. Side clearance is 1/2 inch per side, so the drawer box runs 1 inch narrower than the inside cabinet opening. The series fits drawer material from 12.7mm (1/2 inch) to 19mm (3/4 inch) thick — that covers the common 5/8 inch and 3/4 inch drawer side stock used in production shops.
The white epoxy finish is a deliberate match for white melamine and painted cabinet interiors. In a kitchen with white box interiors, or a closet built from white-faced panel, the slide disappears against the substrate and keeps the finished look clean when a drawer is opened. Almond is available in the same series for natural or cream-colored interiors. If the interior color you're working with doesn't match either finish, this member-level ordering model means you can mix lengths and hands without buying full sets.
The Motion Technology attribute for this SKU reads Standard, meaning no self-close ramp, detent, or damping is built into this drawer member. The drawer rolls freely and stays where you leave it. This is the standard-motion version of the 6600 series drawer member — if you need the self-closing action that the 6600 series is also offered with, confirm you are ordering the self-closing variant. At 75 lb load class and 3/4 extension, this member suits the typical range of kitchen drawers, vanity drawers, and closet pull-outs — not heavy pantry loads or deep-storage applications where full extension matters.
No. This is the left-hand drawer member only. One drawer needs a left-hand drawer member, a right-hand drawer member, and both a left-hand and right-hand cabinet member from the same 6600 series. Order all four components to run a single drawer.
The white epoxy powder coat is formulated to blend with white cabinet interiors. Exact shade matches vary by panel supplier, but in most white melamine and white-painted interiors the member reads as a clean visual match.
No. The 6600 and 6610 are separate Grass series with series-specific components. Pair this 6600 drawer member only with 6600 cabinet members of the same length.
The Grass 6600 series suits drawer sides from 1/2 inch (12.7mm) to 3/4 inch (19mm) thick — the range that covers standard 5/8 inch and 3/4 inch production drawer stock.
This is a 3/4-extension member. At full open, the back few inches of the drawer remain inside the cabinet. It does not give full access to the rear of the drawer box.
When the cabinet box is white and the details matter, matching the slide finish to the interior is the straightforward call. Order the left-hand and right-hand drawer members together with their matching cabinet members, size the box correctly, and the 6600 series does its job without showing up where it shouldn't.
Sold In: 100 Each
