
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
CompX National pin tumbler deadbolt lock is a surface mount lock with a 1-5/8 inch cylinder, so it fits applications that match this cylinder length in typical cabinet and furniture work. This deadbolt lock is keyed different, which means each lock uses a different lock number, supporting jobs where separate keying is preferred across multiple units. The satin chrome finish described as pin tumbler cam satin chrome provides a clean, neutral appearance that works alongside a wide range of cabinet hardware finishes. This lock is specified for drawers, which lets you secure slide-out storage without redesigning the drawer front. It is also specified for right-hand or left-hand doors, so the same lock model can be used on either handing to simplify ordering and layout. For overlay application, the combined thickness of front and frame cannot exceed the cylinder length listed, which helps align selection to the construction of the door or drawer front.
This CompX National surface mount deadbolt lock is designed so the body mounts externally while the cylinder passes through the front, which can streamline layout on cabinet doors and drawers built from standard sheet goods. The 1-5/8 inch cylinder length and the note that the combined thickness of front and frame cannot exceed the listed cylinder length tie selection directly to material build-up around the bore. When that total thickness is within the stated length, the cam positions correctly behind the frame for positive engagement. The stop washer limiting the cam to a 90 degree turn helps define handle movement expectations, which can matter when specifying knob or key access clearances. Key removable in both locked and unlocked positions means the key can be withdrawn after either position is set, which can support workflows where the operator does not carry the key during normal use.
This CompX National pin tumbler deadbolt lock is specified for drawers, so it fits jobs where pull-out storage requires a positive deadbolt action rather than a simple catch. Because it is also specified for right-hand or left-hand doors, the same lock model can be used on hinged cabinet fronts regardless of door swing, which can simplify job planning around mixed door orientations. The surface mount format means the main housing sits on the interior surface, pairing well with common cabinet constructions in the woodworking industry. For overlay application, the guidance that combined front and frame thickness cannot exceed the cylinder length links directly to typical face-frame or frameless overlay builds, aligning this lock to many standard cabinet layouts when that thickness matches the 1-5/8 inch cylinder specification.
The stop washer that allows the cam to turn 90 degrees creates a defined quarter-turn action between locked and unlocked positions, which helps users quickly learn the key travel and reduces uncertainty about whether the cam is fully engaged. The cam extension of 1-1/8 inch provides a fixed reach from the cylinder centerline to the locking point, helping installers position the lock body so the cam throws firmly behind the strike area on drawers or doors. Key removable in both locked and unlocked positions means the locking state does not depend on key presence, which supports routines where cabinets stay unlocked during active work and are locked only when access needs to be restricted. The keyed different stock keying specified as KD, with various lock numbers where a master key will not work, fits environments where each cabinet or workstation is intended to have its own key without master access through this lock family.
The CompX National pin tumbler deadbolt lock is described as surface mount, so the lock body attaches to the cabinet or drawer surface rather than being fully recessed.
This deadbolt lock is specified with a 1-5/8 inch cylinder, which defines the maximum combined thickness of the front and frame it is intended to pass through.
The lock is stated for drawers and for right-hand or left-hand doors, so it can be applied across those cabinet openings using the same product type.
The product description notes cams with a 1-1/8 inch extension, defining the reach from the cylinder center to the locking engagement point.
The stop washer allows the cam to turn 90 degrees, so the lock uses a quarter-turn movement to shift between locked and unlocked positions.
For this lock, keyed different is defined as various lock numbers where a master key will not work, so each lock operates on its own key.
The CompX National pin tumbler deadbolt lock with 1-5/8 inch cylinder and satin chrome pin tumbler cam finish offers a surface mount option aligned to drawers and both right-hand and left-hand doors. The defined 90 degree cam rotation, 1-1/8 inch cam extension, and keyed different stock keying give clear parameters for how it operates and how it will secure typical cabinet fronts. For overlay application where combined front and frame thickness fits within the stated cylinder length, this deadbolt lock provides a focused choice for installers and woodworking professionals planning secure storage points.
Sold In: 1 Each