CompX National Pin Tumbler Cam Lock, 1-3/4" Cylinder with Lipped Overlay Cabinet Contruction Dull Chrome C8109-101-26D
Description
CompX National Pin Tumbler Cam Lock For Cabinets
CompX National pin tumbler cam lock is designed as a cam lock for drawers and right-hand or left-hand doors, so it covers common cabinet locking points with one part number. The 1-3/4 inch cylinder length supports lipped overlay cabinet construction, giving room to span typical front and frame builds. A dull chrome, also described as satin chrome, finish provides a neutral appearance that suits many cabinet hardware layouts. The lock uses a pin tumbler mechanism, so it provides keyed security suited to standard cabinet applications. Key removable in both locked and unlocked positions allows the key to be taken out after closing or opening, which supports quick operation during frequent access. The product is in the cam locks class within locks and latches, fitting typical woodworking and cabinet workflows.
Cam Lock Details That Support Cabinet Work
- The 1-3/4 inch cylinder length is specified for applications where the combined thickness of front and frame does not exceed that length, helping match the lock body to the cabinet section being secured.
- The lock is suitable for drawers plus right-hand or left-hand doors, so one SKU can be used across multiple cabinet door swing directions and basic drawer fronts on a project.
- The design allows the cam to turn 90 degrees when used with the stop washer, providing a defined quarter-turn locking motion that is easy to repeat during installation and daily operation.
- Key removable in both locked and unlocked positions supports workflows where the user wants to remove the key after opening or securing, reducing key hang-up during routine cabinet access.
- The finish is described as dull chrome and satin chrome, offering a consistent metallic appearance that blends with many standard cabinet hardware finishes in commercial or shop-built jobs.
Cam Lock Fit And Cylinder Length Guidance
This pin tumbler cam lock uses a cylinder length that is intended to match overlay applications where the combined thickness of front and frame does not exceed the listed cylinder length. Using a 1-3/4 inch cylinder helps span typical lipped overlay cabinet construction while still allowing threading for the mounting nut. The ability of the cam to turn 90 degrees when a stop washer is used provides a defined travel limit that simplifies alignment to strikes or frame edges. Because the lock is specified for drawers and right-hand or left-hand doors, it can be laid out across a run of cabinets with consistent hole preparation.
Using This Cam Lock In Cabinet Projects
Where This Pin Tumbler Cam Lock Is Applied
This CompX National cam lock is specified for drawers as well as right-hand or left-hand doors, fitting typical cabinet casework where multiple access points require keyed control. In lipped overlay cabinet construction, the 1-3/4 inch cylinder length is intended for situations where the combined thickness of the front and frame does not exceed that length, aligning the cam behind the interior surface. The cam is described with a 1-1/8 inch extension, positioning the locking arm to reach behind the cabinet front or engage a strike location. A stop washer allows the cam to turn 90 degrees, which sets a consistent quarter-turn operation from open to locked or the reverse.
Why Rotation, Keying, And Length Matter In Use
The 90 degree cam rotation enabled by the stop washer creates a predictable handle movement, which helps when aligning the cam with a frame edge or keeper so that locked and unlocked positions land consistently. Having key removable in both locked and unlocked positions means the operator can withdraw the key after opening or after securing, which supports cabinet use patterns where the key does not stay hanging during work. Stock keying options listed as KA, where all are keyed alike to a specified key number and a master key will not work, or KD, where all are keyed different and a master key will not work, allow a choice between shared keys and varied keys on an installation. Two cams with 1-1/8 inch extension provide a defined reach from the cylinder center to the contact point, supporting engagement with cabinet structure in typical layouts. The manufacturer part number C8109-101-26D identifies this satin chrome cylinder configuration within the CompX National cam locks range, aiding repeat ordering for future cabinet runs.
Common Questions About This Cam Lock Setup
What type of applications is this cam lock designed for?
This CompX National pin tumbler cam lock is described for drawers and for right-hand or left-hand doors, covering typical cabinet casework that requires keyed security at multiple access points.
How does the 1-3/4 inch cylinder length affect fit?
The 1-3/4 inch cylinder length is intended for overlay applications where the combined front and frame thickness does not exceed that dimension, helping position the cam correctly behind the cabinet front.
What does a 90 degree cam turn provide in practice?
The ability of the cam to turn 90 degrees with the stop washer creates a quarter-turn action, simplifying alignment of locked and unlocked positions with strikes or case edges during layout.
Why is key removable in locked and unlocked positions useful?
Key removable in both locked and unlocked positions lets the user remove the key after opening or securing the cabinet, which supports workflows where the key is only used momentarily.
What is the purpose of KA and KD stock keying?
KA means all locks are keyed alike to a specified key number and a master key will not work, while KD means all are keyed different and a master key will not work, affecting key control choices.
How does the 1-1/8 inch cam extension influence cabinet layout?
The 1-1/8 inch cam extension defines the reach from the cylinder center to the locking point, helping plan where the cam will engage behind the cabinet front or with a keeper.
Select This Satin Chrome Cam Lock For Cabinet Runs
The CAM LOCK, SATIN CHROME identified as CompX National C8109-101-26D provides a 1-3/4 inch cylinder suited to lipped overlay cabinet construction where front and frame thickness stay within that length. Its use on drawers and right-hand or left-hand doors allows one cam lock style to be applied across multiple cabinet openings. The 90 degree cam rotation with a stop washer and a 1-1/8 inch extension supports consistent engagement points. Stock KA or KD keying options define how keys are managed across an installation. Choose this dull chrome cam lock when a pin tumbler mechanism and satin chrome appearance are appropriate for the cabinet project.
