CompX National Pin Tumbler Cam Lock For Cabinets

CompX National pin tumbler cam lock gives you a keyed locking point for cabinet drawers and right-hand or left-hand doors, so one part number can cover multiple cabinet layouts on the same job. The 1-3/16 inch cylinder works with lipped overlay cabinet construction where the front and frame sit together, as long as their combined thickness does not exceed the listed cylinder length, allowing the lock body to seat correctly in the bore. A dull satin chrome finish matches the SAP description and offers a neutral look that blends with common commercial and shop hardware. This lock belongs to the cam locks class, so it uses a rotating cam to secure the cabinet, giving installers a familiar format for layout and drilling. Stock keying options KA and KD described in the table allow planning keyed-alike or keyed-different runs across multiple cabinets.

Cam Lock Details That Support Cabinet Work

• The 1-3/16 inch cylinder length suits lipped overlay cabinet construction when the combined front and frame thickness stays within that dimension, helping the lock seat firmly without overhanging the interior face.
• The stop washer allows the cam to turn 90 degrees, creating a defined locked and unlocked travel that helps align strikes and keeps operation consistent across banks of drawers or doors.
• Suitability for drawers and both right-hand and left-hand doors lets you standardize on one cam lock across mixed cabinet layouts, simplifying layout, boring, and keying plans on larger projects.
• The overlay application limit, where front and frame thickness cannot exceed the listed cylinder length, ties the hardware choice directly to door construction so you can match material build-ups to the correct lock depth.
• Stock keying options KA (all keyed alike to a specified key number) and KD (all keyed different) let you plan user access patterns, from shared keys on a station to unique keys for individual storage points.

Installation Fit For Lipped Overlay Cabinet Construction

This CompX National pin tumbler cam lock is specified for lipped overlay cabinet construction, so the cylinder is intended to pass through the front and frame as a single stack. The manufacturer notes that for an overlay application, the combined thickness of the front and frame cannot exceed the cylinder length listed, which in this model is 1-3/16 inch, so boring and layout need to follow that build-up. The stop washer sets a 90 degree cam turn, which means the installer aligns the cam to engage or disengage in a quarter-turn motion, simplifying knob orientation and key position. Suitability for drawers and right-hand or left-hand doors keeps the same drilling strategy usable across multiple cabinet types.

Using This Cam Lock In Cabinet Projects

Where This Cam Lock Fits In Cabinet Layouts

This CompX National pin tumbler cam lock fits into cabinet drawers and both right-hand and left-hand doors, so it can serve as the primary lock point on fronts that share the same construction. Being a cam lock, it relies on a rotating cam to grab a strike or cabinet edge, so it is suited to typical cabinet interiors where a simple catching surface can be positioned. The lipped overlay cabinet construction detail means the door or drawer front overlaps the frame with a lip, and the 1-3/16 inch cylinder is dimensioned to reach through that combined thickness without excess projection. Because the combined thickness of front and frame cannot exceed the listed cylinder length, this lock aligns well with constructions that stay within that build-up, allowing the trim washer to sit tight to the front.

Why Cylinder Length, Keying, And Turn Angle Matter

The 1-3/16 inch cylinder length does more than describe size; it sets the working envelope for how thick the cabinet front and frame can be while still allowing full thread engagement and nut tightening on the inside. In overlay applications, respecting that length keeps the lock from bottoming out before the mounting nut clamps, which supports long-term alignment of the cam with its strike point. The stop washer limiting the cam to a 90 degree turn keeps key travel short, which can speed operation in repetitive access situations and gives the installer a predictable locked and unlocked key angle to align with neighboring hardware. Key removable in both locked and unlocked positions lets users remove the key after securing or opening, which can support workflows where the lock needs to stay ready in either state without the key hanging in the cylinder. Stock keying options KA and KD described in the table allow projects to be planned with either common keys across multiple locks or unique keys per location, which is important for balancing user convenience with separation of access.

Common Questions About This Satin Chrome Cam Lock

Selecting This Cam Lock For Cabinet Projects

Choose this CompX National pin tumbler cam lock when the cabinet design uses lipped overlay construction and the combined front and frame thickness matches the 1-3/16 inch cylinder length requirement. The satin chrome finish, 90 degree cam turn, and suitability for drawers plus right-hand or left-hand doors let one model serve across multiple cabinet types on the same job. With stock KA and KD keying options available as described, this lock supports planned key control in commercial or shop environments where cabinet access patterns matter.