CompX National Pin Tumbler Cam Lock For Cabinets

CompX National pin tumbler cam lock is a satin brass cylinder lock designed for drawers and right-hand or left-hand cabinet doors, so it fits common cabinet security needs on a job. The 1-3/4 inch cylinder length works with lipped overlay cabinet construction, giving you reach through the front and frame in that style of build. This cam lock is specified for overlay applications where the combined thickness of front and frame does not exceed the cylinder length, which helps you match it to cabinet construction without reworking the panel. The pin tumbler mechanism provides a familiar key-operated action, which keeps operation straightforward for installers and end users. Stock keying is available as KA, where all locks are keyed alike to a specified key number, or KD, where all locks are keyed different with various lock numbers, so key control can be set to the project pattern.

Keyed Cam Lock Details That Support Cabinet Work

• The 1-3/4 inch cylinder length suits lipped overlay cabinet construction, so the lock body spans the cabinet front and frame in that configuration and seats securely in the material.
• The lock is designed for drawers and for right-hand or left-hand doors, which lets you use the same part across multiple cabinet positions and reduce part variation on a job.
• The stop washer allows the cam to turn 90 degrees, creating a defined locked and unlocked position that is easy to align with strikes or catch points on the cabinet.
• The cam lock uses a satin brass finish, which presents a consistent appearance on visible cabinet fronts and can coordinate with other satin brass hardware in the space.
• Key removal is possible in both locked and unlocked positions, so the user can take the key away regardless of lock state, which supports flexible access routines.
• Stock keying options KA and KD are available, so projects can standardize on one key number or use varied lock numbers according to security requirements.

Cam Lock Installation And Overlay Application Fit

The 1-3/4 inch cylinder on this CompX National cam lock is specified for lipped overlay cabinet construction, so it is sized for situations where the door or drawer front overlays the frame and projects beyond it. For overlay applications, the combined thickness of front and frame cannot exceed the cylinder length, which lets the threaded body and hardware clamp firmly through the material without bottoming out short of the nut. The stop washer limits the cam to a 90 degree turn, so you can position the cam throw to meet a strike or cabinet edge at a predictable angle. The ability to use this cam lock on drawers and on both right-hand and left-hand doors means orientation changes on site do not require a different lock model.

Using This Satin Brass Cam Lock In Cabinet Jobs

Where This Cam Lock Fits In Cabinet Construction

This CompX National pin tumbler cam lock with a 1-3/4 inch cylinder is intended for lipped overlay cabinet construction, so it is suited to cabinetry where the front overlays and extends past the face frame. In these overlay applications, the combined thickness of the front and frame must not exceed the cylinder length listed, which ties the usable cabinet material stack directly to the 1-3/4 inch dimension. The lock is specified for drawers as well as right-hand or left-hand doors, so it can be applied across banks of drawers and mixed door runs in the same cabinet line. A stop washer that allows the cam to turn 90 degrees creates a quarter-turn action between locked and unlocked positions, which is useful when aligning the cam with a fixed strike or cabinet edge.

Details That Support Key Control And Daily Operation

The stock keying options on this satin brass cam lock are defined as KA or KD, which sets up how key control is handled on a project. With KA, all locks are keyed alike to the key number specified, so one key pattern operates every lock in that keyed-alike group. With KD, all locks are keyed different with various lock numbers, so each lock has its own key pattern under the keyed-different option. The product description notes that the key is removable in both locked and unlocked positions, so users can withdraw the key after locking or while leaving the lock open, which can streamline access routines. Other key changes are available from National Lock via special order, indicating further keying patterns can be arranged when a project requires a specific keying scheme beyond stock KA and KD.

Common Questions About This CompX Cam Lock

Select This Satin Brass Cam Lock For Overlay Cabinets

This CompX National pin tumbler cam lock with a 1-3/4 inch cylinder, satin brass finish, and 90 degree cam rotation is purpose-defined for lipped overlay cabinet construction, drawers, and right-hand or left-hand doors. The stated requirement that combined front and frame thickness not exceed the cylinder length directly links the part to overlay material dimensions, guiding where it fits. With stock KA and KD keying options and key removal in locked or unlocked positions, the lock supports defined key patterns and straightforward daily use. For projects calling for a satin brass cam lock built around these dimensions and functions, this C8109-915-4 model provides a clearly specified choice for cabinet security layouts.