CompX National Pin Tumbler Cam Lock, 1-3/4" Cylinder with Lipped Overlay Cabinet Contruction Dull Chrome C8109-107-26D

CompX National Pin Tumbler Cam Lock For Cabinets

CompX National pin tumbler cam lock is a cam lock in dull chrome with a 1-3/4 inch cylinder that secures cabinet applications where a pin tumbler mechanism is preferred for keyed operation. The lock is designed for lipped overlay cabinet construction, so the cylinder length and layout suit overlay fronts with a lip detail commonly found in cabinet builds. The satin chrome finish identified as dull chrome C8109-107-26D presents a neutral, low-glare surface that works well in both utility and finished cabinet environments. The product is categorized as a cam lock for locks and latches, so it functions as the rotating latch element in a cabinet or drawer closure. The manufacturer part number C8109-107-26D gives installers a precise reference when matching existing hardware or planning repeat jobs.

Cam Lock Details That Support Cabinet Projects

• Each lock uses a stop washer that allows the cam to turn 90 degrees, so the rotation is limited to a quarter-turn motion that provides a simple locked/unlocked action without over-travel during operation.
• The lock is specified for drawers, so the cam rotation and cylinder format work in drawer fronts where a rotating cam engages the case or frame to hold the drawer closed.
• The lock is also specified for right-hand or left-hand doors, which means the cam orientation can suit either door swing, simplifying planning across mixed cabinet runs.
• For overlay application, the combined thickness of the front and frame cannot exceed the listed cylinder length, so matching this dimension keeps the cylinder properly engaged through the cabinet front.
• The stock keying options KA and KD define whether all locks share a key number or use various lock numbers, which matters when setting up keyed-alike runs or varied-key installations.

Cam Lock Fit And Cylinder Length Considerations

The 1-3/4 inch cylinder length defines how far the CompX National C8109-107-26D cam lock body projects through a lipped overlay cabinet front and frame, which affects how it seats and how the cam reaches the strike surface. For overlay applications, the combined thickness of the front and frame cannot exceed the listed cylinder length, so matching the door or drawer build to this limit keeps the lock body properly threaded and supported. The 90-degree stop washer controls cam travel at a quarter turn, so installers can position the cam to land reliably on the frame or strike within that rotation window. The specified use on drawers and on right-hand or left-hand doors indicates that the basic fit geometry accommodates typical cabinet door and drawer layouts.

How This Cam Lock Works In Cabinet Use

Using The Cam Lock On Drawers And Doors

This CompX National pin tumbler cam lock is specified for drawers, so it mounts through the drawer front with the cam positioned to rotate behind the cabinet face, engaging the cabinet structure to hold the drawer closed when the key turns. It is also specified for right-hand or left-hand doors, so the same lock body and cam assembly can be set up to engage a frame edge on either door swing by rotating or selecting the appropriate cam orientation. The lipped overlay cabinet construction reference means the lock is suited to fronts that overlay the cabinet with a lip, so the 1-3/4 inch cylinder passes through the front and into the frame area to place the cam at a workable depth relative to the cabinet interior. In use, the 90-degree stop washer limits rotation to a simple quarter turn, giving a clear open/close position that suits regular access in cabinet environments.

Key Function, Keying Options, And Daily Operation

The lock is described as a pin tumbler cam lock, so the cylinder uses a pin tumbler keyway that provides keyed control of the cam position in typical cabinet duty. The key is removable in both locked and unlocked positions, which allows the key to be taken away after locking or after unlocking, depending on how access needs to be managed at the location. Stock keying options are identified as KA, meaning all keyed alike to a specified key number, or KD, meaning all keyed different with various lock numbers, and in both cases the master key will not work on these locks, so each scheme defines a closed keying system for that set of locks. Other key changes are available from National Lock via special order, indicating that alternate key arrangements beyond KA and KD can be specified through that route when projects require particular key control patterns.

Common Questions About This CompX Cam Lock

Selecting This Cam Lock For Cabinet Projects

The CompX National pin tumbler cam lock C8109-107-26D in dull chrome is identified for drawers, right-hand doors, and left-hand doors using lipped overlay cabinet construction, so it aligns with many cabinet layouts using that front style. The 1-3/4 inch cylinder and 90-degree stop washer define both the depth and motion of the lock, so those dimensions and the quarter-turn action establish how it will operate in service. The choice between KA and KD stock keying lets projects use shared keys or varied keys while keeping master keys out of the system. For cabinet runs using these requirements, this cam lock provides a defined cylinder length, motion limit, and keying pattern to match the stated applications.