CompX National Pin Tumbler Cam Lock, 1-3/16" Cylinder with Lipped Overlay Cabinet Contruction, Dull Chrome C8103-107-26D
Description
Pin Tumbler Cam Lock For Cabinet Security
Pin tumbler cam lock from CompX National is a cam lock designed for cabinet applications where a compact cylinder needs to secure a drawer or door. The 1-3/16 inch cylinder length works with lipped overlay cabinet construction, so the lock body reaches through the combined thickness of the cabinet front and frame. The satin chrome finish provides a dull chrome appearance that blends into typical shop and commercial casework, helping hardware visually match existing fittings. The pin tumbler mechanism provides a defined locked and unlocked position, so the key rotation clearly indexes between open and secure states. The cam lock format lets the rotating cam act directly on the cabinet frame or strike, which simplifies the way the door or drawer is held closed. This configuration suits installers setting up cabinets where a small, cylinder-based lock is preferred over more complex lock bodies.
Cam Lock Details That Support Cabinet Work
- The cylinder length is 1-3/16 inch, which allows the lock to serve overlay applications where the combined thickness of the cabinet front and frame does not exceed this cylinder length, helping the cam reach and engage the frame properly.
- A stop washer is supplied for this lock, and it allows the cam to turn 90 degrees, so the cam movement is limited to a quarter turn, giving a predictable locked and unlocked travel that suits simple drawer or door engagement points.
- The lock is described for drawers and for right-hand or left-hand doors, so the same core can be applied across different cabinet orientations, simplifying hardware selection across a job with mixed cabinet layouts.
- The design is stated for overlay applications, which means the cabinet door or drawer front overlays the frame while the cylinder projects through, keeping the lock function aligned with common face-frame or overlay construction.
- Key removal is available in both locked and unlocked positions, so the user can withdraw the key after locking or after opening, which can streamline operation where keys are used by different staff or in quick-access situations.
Cabinet Cam Lock Fit And Installation Use
The CompX National pin tumbler cam lock uses a 1-3/16 inch cylinder that works when the overlay cabinet front and frame thickness together are within that cylinder length, so the threaded portion passes fully through, allowing secure mounting. A trim washer and spur washer for wood are described, so the lock can sit neatly against the outer surface while the spur bites into wood substrates, helping resist rotation as the cam is turned. A mounting nut secures the lock from the rear, so installers can tighten the assembly against the cabinet material for a firm fit. The 1-1/8 inch extension cams referenced in the description give the cam reach to contact the cabinet frame or strike, allowing the quarter-turn motion to pull or block the door or drawer front effectively.
Using This CompX National Cam Lock On Jobs
Where This Satin Chrome Cam Lock Is Applied
This CompX National pin tumbler cam lock is described for drawers and for right-hand or left-hand doors, so it can be applied to a range of cabinet fronts within the same project. The reference to lipped overlay cabinet construction indicates it suits cases where the door or drawer front overlays the opening and often has a lip that overlaps the frame, letting the cam lock body thread through that assembly. When used in overlay applications where the combined thickness of the front and frame does not exceed the 1-3/16 inch cylinder length, the cam sits behind the frame to act as a catch, so the rotation secures the front against the cabinet body. The satin chrome, described as dull chrome, helps the visible cylinder and trim sit cleanly against commercial casework and shop cabinets, matching other satin-finished hardware on the same installation.
Details That Support Consistent Locking Performance
The stop washer that allows the cam to turn 90 degrees sets a controlled quarter-turn operation, so installers know the cam will move through a consistent arc from unlocked to locked position. Key removal in both locked and unlocked positions lets the user pull the key at either endpoint of that 90 degree travel, so the lock can be left open or closed without the key hanging in the cylinder, which can reduce interference with drawers or doors during operation. The cams described with 1-1/8 inch extension provide a defined reach behind the frame, so the cam can catch or release a strike surface confidently instead of barely engaging. Stock keying options KA, described as all keyed alike to a key number where a master key will not work, and KD, described as all keyed different with various lock numbers where a master key will not work, let a project either reuse a common key for multiple locks or separate access between different units. Other key changes are described as available from National Lock via special order, so locksmiths and fabricators can align lock codes to existing key systems when projects require it. The product is listed under cam locks within locks and latches, reinforcing its role as a compact cylinder solution in cabinet workflows.
Common Questions About This Cam Lock Setup
What type of lock is the C8103-107-26D unit?
The C8103-107-26D unit is a CompX National pin tumbler cam lock, so it uses a rotating cam behind the panel to secure drawers or doors in cabinet applications.
How far does the cam rotate on this cabinet cam lock?
This pin tumbler cam lock uses a stop washer that allows the cam to turn 90 degrees, giving a quarter-turn motion from locked to unlocked for predictable operation.
What cylinder length does this CompX National cam lock use?
This CompX National cam lock has a 1-3/16 inch cylinder, so it suits overlay cabinets where the combined front and frame thickness stays within that length for proper mounting.
Can this satin chrome cam lock work on right- and left-hand doors?
This satin chrome pin tumbler cam lock is described for drawers and for right-hand or left-hand doors, so it can be oriented to suit different cabinet layouts.
When can the key be removed from this cam lock?
This cam lock allows the key to be removed in both locked and unlocked positions, so the key does not need to stay in the cylinder after operating the lock.
What keying options are available for this cam lock?
This cam lock offers KA stock keying, where all are keyed alike with no master key function, and KD stock keying, where all are keyed different with various numbers and no master key function.
Selecting This Cam Lock For Cabinet Projects
The CompX National pin tumbler cam lock with 1-3/16 inch cylinder and satin chrome finish is set up for drawers and right- or left-hand overlay doors, giving one format for multiple cabinet fronts. The 90 degree cam rotation, key removal in locked and unlocked positions, and 1-1/8 inch extension cams provide a straightforward locking stroke that fits common drawer and door engagements. KA and KD stock keying choices support either shared-key or separate-key layouts on jobs. For cabinet work needing a compact, satin chrome cam lock, this C8103-107-26D configuration aligns with typical overlay construction and straightforward quarter-turn operation.
