CompX National Pin Tumbler Cam Lock, 1-3/4" Cylinder with Lipped Overlay Cabinet Contruction Dull Chrome C8109-103-26D
Description
CompX National Pin Tumbler Cam Lock For Cabinets
CompX National pin tumbler cam lock C8109-103-26D is a cam lock designed for lipped overlay cabinet construction in drawer and door applications, so it secures common cabinet layouts with a single part. The 1-3/4 inch cylinder length supports overlay applications where the combined thickness of cabinet front and frame stays within that length, helping installers match lock depth to typical cabinet builds. The dull chrome, also described as satin chrome, finish provides a neutral appearance that blends with many cabinet hardware styles in commercial or residential work. As a pin tumbler cam lock from the CompX National cam locks line, it fits into standard cam lock workflows where keyed security and repeatable operation are needed. The CompX National brand and specific manufacturer part number C8109-103-26D help shops reorder the same lock configuration for future jobs without guessing.
Key Locking Details That Support Cabinet Work
- Each lock is supplied with one stop washer that allows the cam to turn 90 degrees, so you get a positive open-or-closed position useful for straightforward latch alignment on drawers and doors.
- The lock works on drawers plus right-hand or left-hand doors, allowing one lock style to cover multiple cabinet orientations and simplifying jobsite planning across a run of casework.
- For overlay applications, the combined thickness of cabinet front and frame cannot exceed the listed cylinder length, giving a clear thickness limit that guides material selection and construction details.
- The key is removable in both locked and unlocked positions, which lets users remove the key after locking or keep it out of the lock when left open, supporting different key control routines.
- Two cams with 1-1/8 inch extension are supplied, giving installers options on cam reach to match strike locations on various cabinet layouts without changing the base lock body.
Cam Lock Mounting And Overlay Fit Considerations
The 1-3/4 inch cylinder on this CompX National pin tumbler cam lock sets the depth requirement for lipped overlay cabinet construction, so cabinet fronts and frames need a combined thickness within that dimension for proper seating. This thickness limit helps layout drilling locations and material stack-ups in advance, so the cam engages cleanly once mounted. The stop washer that limits cam travel to 90 degrees defines the swing range during installation, making it easier to set the locked and unlocked positions relative to the frame or strike. Because the lock functions on drawers plus right-hand or left-hand doors, the same drilling pattern supports multiple cabinet orientations, which can streamline shop templates and field retrofits.
Using This C8109-103-26D Cam Lock In Practice
Where This Cam Lock Fits In Cabinet Projects
This CompX National pin tumbler cam lock is specified for lipped overlay cabinet construction, so it fits well into cabinet projects that use overlay fronts with a defined frame thickness. By working for drawers as well as right-hand or left-hand doors, one lock type can cover file drawers, storage doors, and similar compartments across a single installation. The 1-3/4 inch cylinder length ties directly to how deep the lock sits in the cabinet front, which suits many medium-thickness door and drawer fronts that are common in woodworking and casework. With two cams that provide 1-1/8 inch extension, the lock can reach strikes or frame edges in a range of cabinet geometries, supporting use on both shallow and deeper reveals. The satin, or dull, chrome finish works across many cabinet hardware programs where a subdued metal finish is preferred.
Details That Help Repeatable Locking Performance
The stop washer on this C8109-103-26D cam lock limits rotation to 90 degrees, so the installer can set a clear locked and unlocked orientation that users quickly understand. This defined quarter-turn action also supports consistent alignment when multiple locks are used on a bank of cabinets, reducing rework from misaligned cams. Because the key is removable in both locked and unlocked positions, facilities can establish their preferred key-handling routine, whether that means removing keys after locking or leaving cabinets unlocked during active use without a key hanging from the cylinder. Stock keying options designated as KA and KD define whether locks are keyed alike or keyed different, which affects how many key changes appear across a project and supports planned key control. Other key changes available from National Lock via special order allow projects to specify alternate keying patterns when that level of control is required.
Common Questions About This CompX Cam Lock
What cabinet construction is this C8109-103-26D cam lock designed for?
The C8109-103-26D cam lock is designed for lipped overlay cabinet construction, so it suits cabinets where the door or drawer front overlays the frame with a defined edge.
How does the 1-3/4 inch cylinder length affect installation?
The 1-3/4 inch cylinder length sets the maximum combined thickness of cabinet front and frame, guiding material choices so the lock seats correctly in overlay applications.
Can this cam lock be used on both drawers and doors?
This CompX National pin tumbler cam lock works on drawers and on right-hand or left-hand doors, letting one lock style serve multiple cabinet orientations.
What does key removable in locked and unlocked positions mean?
This feature means the key can be taken out whether the cam lock is locked or unlocked, supporting different key-control habits for users or facilities.
How far do the cams reach on this CompX National cam lock?
The cams have a 1-1/8 inch extension, so they can engage strikes or cabinet frames within that reach, which is helpful across different door and drawer depths.
What is the function of the 90 degree stop washer?
The stop washer limits cam rotation to 90 degrees, creating a clear open and closed position that simplifies aligning the cam with the frame or strike.
Selecting This Cam Lock For Overlay Cabinets
The CompX National pin tumbler cam lock C8109-103-26D offers a 1-3/4 inch cylinder and 90 degree cam rotation, giving cabinet builders clear parameters for lipped overlay work. When a project calls for drawer and door security using a satin chrome cam lock that accepts key removal in locked and unlocked positions, this model provides those defined characteristics. Selecting this specific CompX National cam lock keeps part numbering consistent across jobs so ordering and installation align with the same proven configuration.
