Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 24 inch file drawer slide identifies this as a 24 inch long, right hand cabinet member from the KV Model 8500 series, so it supports standard drawer depths in file and storage cabinets using this heavy-duty platform. The full extension design lets the drawer travel its full length, giving clear access to files at the very back, which reduces reach-in time and makes labeling easier to see. Side clearance of 1/2 inch plus or minus 1/32 inch on each side defines the opening you build into the cabinet, so the drawer box can be sized confidently for smooth running. A slide height of 3-51/64 inch including the quick disconnect rail sets the minimum drawer side and opening height, which helps avoid interference with face frames or adjacent hardware. The side mount, ball bearing construction supports a familiar installation layout for many shop-built and commercial casework projects.
This side mount, ball bearing file drawer slide installs on the cabinet side wall, using the specified 1/2 inch plus or minus 1/32 inch side clearance per side to position the drawer accurately in the opening. The recommended fasteners are #7 x 1/2 inch Phillips pan head screws, which match the slide holes and provide a secure hold in cabinet members and drawer sides. The 3-51/64 inch total slide height including the quick disconnect rail helps you plan vertical hole placement so the moving member clears the drawer bottom and any under-mounted components. Because the member follows the 32 mm pattern, it can be registered to pre-bored rows, which simplifies repeatable mounting along tall cabinet sides. The right hand designation keeps orientation clear, pairing with left hand members from the same 8500 series when building full slide sets.
This 24 inch right hand cabinet member belongs to the KV Model 8500 side mount, ball bearing family, so it is suited to file drawer and cabinet applications built around that series. The full extension travel lets drawers pull completely out over their 24 inch length, which is useful when folders or contents must be accessed across the entire depth. The hold-in anti-rebound feature keeps the drawer seated at the closed position, which helps resist bounce back in high-use office or shop settings where drawers are pushed closed firmly. Positive in and out stops define the travel limits, which helps protect the slide from over-travel and reduces impact on the enclosure. A retainer that holds three bearings per inch of race supports smooth and quiet motion along the slide, which benefits work areas that need controlled drawer movement rather than abrupt starts and stops. The Anochrome finish option ties this member visually to other hardware finished the same way in coordinated casework runs.
The 8500-98 24 right hand cabinet member uses factory-attached drawer release clips with quick disconnect drawer members, which allows the drawer to be separated from the cabinet member during fitting or service without removing the entire slide. This quick disconnect arrangement lets installers adjust drawer boxes and fronts more easily once the basic alignment is set. The 32 mm pattern on the slide gives fixed reference points along the length, which helps crews who drill cabinet sides on that system locate screws quickly at consistent offsets. Using the recommended #7 x 1/2 inch Phillips pan head screws pairs the slide hole size with a known shank and head profile, which helps the slide seat fully against the cabinet side and drawer member without distortion. The defined 1/2 inch plus or minus 1/32 inch side clearance each side narrows the acceptable gap range, supporting drawer box sizing that limits play while still allowing a free-running action. Together, these details back up repeatable installations across multiple cabinets built around the same 8500 series platform.
The KV 8500-98 24 right hand cabinet member has a 24 inch length, which matches file drawers and cabinet boxes designed around a 24 inch slide travel.
The slide requires 1/2 inch plus or minus 1/32 inch side clearance on each side, guiding cabinet opening and drawer box width for smooth movement.
The right hand cabinet member height is 3-51/64 inch including the quick disconnect rail, which helps plan drawer side height and vertical spacing.
The hold-in anti-rebound feature helps keep the drawer closed at the end of travel, reducing bounce back when drawers are closed with extra force.
Recommended fasteners are #7 x 1/2 inch Phillips pan head screws, which match the slide mounting holes and support a secure side mount installation.
The slide has a 32 mm pattern, so it aligns with system-drilled 32 mm cabinet sides, helping speed layout and mounting in production environments.
The 8500-98 24 right hand cabinet member is a made in USA component from the KV Model 8500 series, so it suits projects already built around these side mount, ball bearing slides. Its 24 inch full extension travel, 1/2 inch plus or minus 1/32 inch side clearance, and 3-51/64 inch height define key layout dimensions, helping you size drawer boxes and openings with confidence. When a file or storage cabinet calls for a right hand 24 inch member with a 32 mm pattern, hold-in anti-rebound action, and quick disconnect capability, this part matches those requirements for consistent casework runs.
Sold In: 10 Each
