Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The US Futaba NJ-31733 series is a 100 lb class side-mount ball-bearing drawer slide with over-travel, available in a zinc finish and sold in a box of 10 pairs. It is built for shop cabinets, utility drawers, and commercial casework where the drawer needs to clear a countertop overhang or deep face frame completely.
Standard full-extension slides bring the drawer face to the cabinet opening — over-travel goes further. When a bench top, countertop, or deep face frame sits in front of the cabinet opening, a standard slide leaves the back of the drawer inside and unreachable. The over-travel design on this slide pushes the drawer member past the slide's nominal length so the rear of the box clears the overhang entirely. That matters in shop cabinets built under workbenches, utility cabinets with thick face frames, and commercial millwork where rear storage needs to be genuinely accessible. At 100 lb per pair, the slide handles a loaded hardware drawer, a stocked parts tray, or a dense filing application without straining the mechanism.
Steel members with an electroplated zinc finish give the slide corrosion resistance for indoor use. The zinc finish is a working surface, not a decorative one — it holds up in shop environments without requiring special care. These slides are built to carry a load and stay in service, not to be seen. For outdoor, marine, or washdown environments, a stainless option is the correct choice; zinc is rated for dry indoor service.
Cabinet shops running production builds get the most from the 10-pair box format — enough slides for five drawers in one order, with no mismatched leftovers. The non-handed design speeds installation on multi-drawer cases. Contractors outfitting utility rooms, shop furniture builders, and commercial millwork operations will find the 100 lb class appropriate for the majority of non-kitchen applications where a standard 75 lb slide leaves too little margin. The 16 inch nominal length suits mid-depth cabinets and standard shop-cabinet boxes.
Standard motion — no soft-close damper and no self-close ramp. The drawer stays wherever it is left. If damped closing is needed, look for the soft-close variant in this series.
Side clearance for the NJ-31733 series is not confirmed in the available data. Standard side-mount ball-bearing slides typically require 1/2 inch per side, but verify against the US Futaba spec sheet before sizing your drawer box.
Per pair, the standard basis for drawer slide ratings. One box of 10 pairs supports 10 drawers at 100 lb each.
The available data does not confirm whether fasteners are included. Plan to order mounting screws separately if your supplier does not bundle them with this pack.
Side-mount slides can work in face-frame construction, but the back of the slide needs rear support — typically a rear mounting bracket or socket. Confirm rear hardware requirements before ordering for face-frame installs.
The 10-pair box format means fewer reorders on multi-drawer projects and a full complement of slides on hand when production starts — so the build keeps moving without a parts delay.
Sold In: 1 Pair