Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The US Futaba 14 inch over-travel ball-bearing drawer slides deliver controlled, damped closing and travel beyond full extension in a side-mount package sized for shallower cabinets and compact utility drawers. Sold as a box of 10 pairs, they are a practical volume pick for shops and contractors fitting multiple drawers at once.
A 14 inch slide occupies less cabinet depth than the 18 and 22 inch slides most shops default to, but the load challenge is the same: rear contents still need to clear the opening. Over-travel solves that by pushing the drawer past the slide length, so the back of a compact hardware drawer, parts bin, or office file comes fully out to the cabinet face. Pair that with soft-close on a 100 lb rated pair and the drawer closes quietly even when it is loaded to capacity. This is the configuration for base cabinets under deep countertop overhangs, shallow wall-mounted shop units, and commercial millwork where interior depth is constrained but access cannot be compromised.
Steel members with a zinc finish give these slides their corrosion resistance for everyday indoor use in shops, garages, and commercial environments. The soft-close damper is integrated into the slide mechanism, not bolted on as an afterthought, so it handles the full rated load without bottoming out or losing response over time. The ball-bearing raceways run the full length of the members, distributing load evenly and keeping the slide tracking straight. Side clearance information is not published in the available data for this series, so confirm the required gap with the US Futaba specification sheet before sizing the drawer box.
Cabinet shops building compact base units, commercial millworkers fitting drawers in shallow casework, and contractors spec-ing utility storage in tight spaces all share the same problem: standard longer slides do not fit, but the load requirement does not shrink with the cabinet. The 10-pair box format suits a production run rather than a single-drawer repair job. Designers specifying handle-less fronts will find the soft-close particularly valuable at this load class, where a damper-free drawer slams hard and wears the front joint over time. These slides are for indoor installations only; the zinc finish is not rated for wet, washdown, or outdoor environments.
Per pair, which is the standard basis for drawer slide load ratings. One pair consists of two slides, one mounted on each side of the drawer.
The over-travel distance for this series is not stated in the available product data. Contact US Futaba or request the NJ-31733 series specification sheet for the exact over-travel measurement before designing to a tight depth.
Side clearance is not published in the available data for this series. Confirm the required gap with the manufacturer's spec sheet before cutting the drawer box to width.
Screw inclusion is not confirmed in the available product data. Plan to source appropriate fasteners separately and size them to the slide's mounting holes for the full rated load.
Side-mount slides in face-frame cabinets typically require rear mounting brackets to support the back of the slide, since the cabinet side is set back from the frame. Rear bracket availability for this series is not confirmed in the available data; verify before specifying for face-frame work.
The box of 10 pairs puts over-travel soft-close capacity exactly where compact heavy-duty drawers need it, at a quantity that makes sense for production installs rather than piecemeal repairs.
Sold In: 1 Pair