Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This 26 inch side-mount ball-bearing slide from US Futaba's NJ-31733 series pairs over-travel extension with a 100 lb per pair rating, built for deep drawers that need to clear countertop overhangs or face frames so rear contents are fully reachable. Sold as a box of 10 pairs.
A 26 inch slide serves deep cabinets, and deep cabinets are exactly where over-travel matters most. When a drawer sits under a countertop overhang or behind a deep face frame, full extension gets the drawer to the cabinet face — but over-travel moves it past that point, so the back of the drawer is actually reachable without pulling items from the front half first. That distinction is most apparent in workbench drawers, deep base cabinets in shop and commercial settings, and storage units where a loaded drawer pushes all the way out and stays there while you work.
This slide has no closing mechanism — the drawer rides freely on its bearings and stays where it is left. That straightforward motion suits installations where a self-close or soft-close action would interfere, including layouts planned for a separate push-to-open mechanism or any setup that simply does not need a controlled close.
The cabinet and drawer members are formed steel, running on ball-bearing raceways the full length of travel. The zinc finish is the standard protective coating for this class of side-mount slide: functional, durable for indoor service, and consistent across the pair. At a 26 inch length and 100 lb class, fastener quality matters — drive the mounting screws into solid panel material and size them to the slide's mounting holes to keep the rating honest.
Cabinet shops building deep base units with challenging face-frame or overhang geometry reach for this slide when they need reliable over-travel at a straightforward 100 lb class rating. The 26 inch length fits drawer boxes in the 24 to 26 inch depth range that appear in kitchen base cabinets, workbench drawers, and commercial utility casework. The box of 10 pairs works well for production runs where consistent slide specs matter across multiple identical drawers. Side clearance for this series is not stated in the available data — confirm the required gap per side before sizing drawer boxes.
Per pair, which is the standard basis for drawer slide load ratings. Two slides carry the load together; do not double the number by counting each slide separately.
The over-travel length for this specific model is not stated in the available product data. Confirm the exact travel past full extension with the US Futaba spec sheet before building to tight clearances.
No. Motion is standard — the drawer rides freely on the bearings with no self-close, soft-close, or hold-in detent. The drawer stays wherever it is pushed or pulled.
Screws are not listed as included. Plan to order mounting hardware separately, sized to the slide's mounting holes and appropriate for the panel material.
Yes, but face-frame construction sets the cabinet side back from the frame, so the rear of the slide needs support. Use rear mounting brackets appropriate to a side-mount slide in face-frame work; confirm bracket compatibility with the NJ-31733 series before ordering.
When the job calls for a 26 inch drawer that clears an overhang and gives full access to the back, this US Futaba over-travel slide delivers the travel, the load class, and the production quantity to keep the build moving.
Sold In: 1 Pair