Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The US Futaba NJ-31733 series 24 inch slide is a side-mount ball-bearing drawer slide with over-travel extension, sold as a box of 10 pairs. It is built for installations where the drawer must travel past full extension to clear a countertop overhang, deep face frame, or bench overhang — putting the entire drawer interior, including the back, within reach.
Standard full-extension slides bring the drawer face to the cabinet opening. Over-travel goes further, pushing the drawer body past that point so the back of the box clears an overhanging countertop or a thick face frame. That extra travel is the deciding factor in kitchen drawers tucked under deep stone counters, workbench drawers under solid tops, and commercial casework where the cabinet frame eats into the opening. At 24 inches, this slide suits standard kitchen and shop drawer depths where the extra reach at the end of travel solves a real access problem.
The members are formed steel with a zinc finish for corrosion resistance in dry, indoor service. Zinc plating is a functional finish: it protects the steel through years of daily cycles without adding visual weight inside the cabinet. Side clearance and exact over-travel length are not listed in the available product data — confirm both from the US Futaba NJ-31733 specification sheet before sizing your drawer box, and use fasteners appropriate to the slide's mounting holes and the cabinet material at this load class.
Cabinet shops building production runs of kitchen or utility drawers will get the most from the 10-pair box format. The 100 lb per pair rating places this slide in the working range for loaded kitchen drawers, shop storage drawers, and light commercial casework — solid coverage without stepping up to a 150 or 200 lb class. Designers and contractors specifying drawers under deep overhangs will find the over-travel extension resolves the access problem that a standard full-extension slide leaves behind. These slides are for indoor, dry installations.
Per pair — the standard basis for drawer slide load ratings. One pair of slides supports up to 100 lb of drawer and contents.
The exact over-travel length is not confirmed in the available product data. Check the US Futaba NJ-31733 specification sheet for the precise figure before finalizing your drawer box depth.
Side clearance is not stated in the available data. Confirm this dimension from the manufacturer's spec sheet and size your drawer box accordingly — this is a critical fit dimension at installation.
No. The motion is standard — no damper and no self-close ramp. The drawer stays wherever it is left. If soft-close is a requirement, look for a soft-close variant in this series.
Screws are not confirmed as included. Plan to order mounting hardware separately unless the manufacturer's packaging indicates otherwise.
A single box stocks a multi-drawer project at the 100 lb class with the over-travel extension that clears deep overhangs — so the build moves forward without a parts gap at the bench.
Sold In: 1 Pair