Kitchen Kompact Warmwood wall cabinet gives you a 24 inch wide, 30 inch high, 12 inch deep upper cabinet that fits standard wall layouts, so installers can line up runs and corner turns without custom sizing on site. The recessed panel Warmwood door style matches the Kitchen Kompact line, which helps keep a consistent look across a full kitchen when mixing base and wall units. The cabinet uses maple flat panel doors, so you get a hardwood face that finishes cleanly and stands up to normal kitchen use. Door frames are mortised and tenoned construction of solid 3/4 inch maple, creating tight joints that hold alignment during handling and hanging. Solid wood corner blocks are glued and power nailed, which ties the box together at stress points and supports everyday door operation. Solid wood hanging strips located on the top and bottom give a solid bite for mounting fasteners into wall framing.
The 24 inch width on this Warmwood wall cabinet fits common layout modules, so it drops into many standard kitchen designs without field trimming. At 30 inches high, the cabinet works in typical wall rows under most ceiling heights, giving a predictable reveal above base cabinets. The 12 inch depth matches standard wall cabinet depth, which keeps walkways clear and aligns with other Kitchen Kompact wall units. Solid wood hanging strips located on the top and bottom give installers defined zones for fasteners, helping the cabinet pull tight to studs while maintaining case integrity. Concealed, self-closing hinges on the maple flat panel doors keep hardware hidden from the front and pull doors shut, which streamlines the look and supports everyday door operation.
This Warmwood 24 x 30 x 12 wall cabinet fits into upper runs where a 24 inch span is needed, such as over small appliances or between windows, giving designers a predictable block for layout. Being part of the Kitchen Kompact category, it matches other Kitchen Kompact cabinets in style, which simplifies planning a continuous Warmwood recessed panel look from wall to wall. The maple flat panel doors with rotary cut hard maple veneer face tie in with other maple-faced components, helping create a unified grain and color appearance across adjoining units. Adjustable shelves inside the 12 inch deep case let installers set interior spacing to suit plates, glasses, or pantry containers, which improves usable storage in this cabinet width. Concealed, self-closing hinges maintain a clean face on the Warmwood doors, which matters when several WW24W units are ganged side by side in a visible run.
Door frames in solid 3/4 inch maple with mortise and tenon joints keep the Warmwood doors stable, which supports consistent reveals when aligning multiple cabinets along a wall. Solid wood corner blocks that are glued and power nailed keep the cabinet box square, so face frames line up smoothly with neighboring units during installation. Solid wood hanging strips at both the top and bottom provide defined structural bands for fastening, which helps maintain level and plumb alignment over the cabinet length. The three-ply flat panel plywood with hard maple veneer face keeps the center panel stable, reducing the panel movement that can affect door fit in typical kitchen conditions. The four step stain, sealer, sanding and catalyzed top coat system creates a finished surface that stays consistent across doors and face frames, which matters when aligning several Kitchen Kompact Warmwood wall cabinets in the same sight line.
The Kitchen Kompact Warmwood wall cabinet measures 24 inches wide, 30 inches high, and 12 inches deep, so it fits standard upper cabinet layouts and typical wall cabinet depths.
The cabinet uses maple flat panel doors with a recessed panel design, so it provides the Warmwood look that coordinates with other Kitchen Kompact cabinets in the same style group.
The doors use mortised and tenoned solid 3/4 inch maple frames with a three-ply flat plywood panel and hard maple veneer face, giving a stable, hardwood-framed door for everyday kitchen use.
The Warmwood wall cabinet uses concealed, self-closing hinges, so the hardware stays hidden from the front and the doors are pulled closed after opening.
The cabinet has solid wood hanging strips located on the top and bottom, providing strong mounting areas that transfer cabinet and content loads into wall framing.
The Warmwood cabinet receives a four step process of stain, sealer, sanding and catalyzed top coat, producing a complete finish system over the hard maple veneer and maple frames.
This Kitchen Kompact Warmwood 24 x 30 x 12 wall cabinet gives you a defined module for upper runs, with maple flat panel doors, mortise and tenon 3/4 inch maple frames, and concealed self-closing hinges supporting daily use. Solid wood corner blocks and solid wood hanging strips help the box stay square and carry load into wall framing during installation. Use this WW24W cabinet anywhere a 24 inch wide Warmwood recessed panel wall unit fits your Kitchen Kompact design.
Sold In: 1 Each