Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood wall cabinet 27 inch is a 27 inch wide, 30 inch high, 12 inch deep wall cabinet designed to add enclosed storage at eye level. The recessed panel Warmwood design gives a consistent look across a run of cabinets, which matters when matching existing Kitchen Kompact installations or planning a full layout.
The maple flat panel doors use door frames built from solid 3/4 inch maple with mortised and tenoned construction, so the joints lock together mechanically and resist racking during daily door use. A flat panel plywood insert with a three-ply construction and rotary cut hard maple veneer face creates a stable center panel that stays flatter under typical kitchen humidity, helping doors stay visually aligned across the row.
Solid wood corner blocks are glued and power nailed into the cabinet, tying the sides together at the corners so the case stays square during mounting and while supporting stored contents. Solid wood hanging strips at the top and bottom of the cabinet give clear structural zones for fastening to wall studs, which supports a straightforward installation layout and reliable long-term hanging strength.
The WW27W 27 x 30 x 12 cabinet sizing provides a standard wall cabinet footprint that integrates into common 27 inch wide layouts over counters or work areas. The 12 inch depth keeps the cabinet projection in a typical range, balancing storage volume with headroom over the counter or workspace.
Solid wood hanging strips located on both the top and bottom edges create two horizontal mounting zones, so installers can place fasteners into studs along either strip while leveling the cabinet. Because the corner blocks are glued and power nailed into the case, the cabinet maintains its rectangular shape during lifting, clamping, and fastening, which supports tight seams when ganging multiple Kitchen Kompact cabinets side by side.
Concealed, self-closing hinges keep the hinge mechanism inside the cabinet and behind the maple flat panel doors, so hinge adjustment focuses on door reveal and swing without exposed hardware affecting the cabinet face line.
The recessed panel kitchen wall cabinet format puts the Kitchen Kompact maple wall cabinet into upper storage runs over countertops, appliances, or workbenches where a 27 inch width fits the design. At 30 inches high, the cabinet stacks well with other standard-height wall units to create a consistent top line around the room.
The maple flat panel cabinet doors with Warmwood finish align with other Kitchen Kompact pieces labeled Warmwood, giving designers and installers a coordinated visual when planning full kitchens, break rooms, or similar spaces. Because the flat panel plywood insert carries a rotary cut hard maple veneer face, the door centers visually complement the solid 3/4 inch maple frames, which matters when aligning grain and tone across a multi-cabinet installation.
Solid wood hanging strips at the top and bottom of the cabinet back provide specific attachment zones, so wall layouts that rely on stud spacing can use these strips for consistent fastening locations across each WW27W in a run. The overall 12 inch depth keeps front faces aligned with other standard-depth wall cabinets, helping installers maintain a straight front plane when mixing this cabinet with additional Kitchen Kompact units.
The door frames use mortised and tenoned construction of solid 3/4 inch maple, so each joint creates a tight mechanical connection that supports reliable door squareness during installation and later hinge adjustment. This matters when aligning reveals across several Warmwood WW27W cabinets, reducing time spent tweaking hinge positions to correct joint movement.
Glued and power nailed solid wood corner blocks at the cabinet corners increase structural rigidity, so the case resists pulling out of square when lifted, clamped, or fastened to uneven walls. This structural integrity helps doors hang correctly and allows adjustable shelves to sit level inside.
The four step finishing process - stain, sealer, sanding, and catalyzed top coat - produces a consistent Warmwood surface that stands up to regular contact from hands and cookware, which supports long-term appearance around active work areas. Concealed, self-closing hinges control door travel so doors return fully closed at the end of motion, keeping the front line of maple flat panel doors even without exposed hinge hardware.
Adjustable shelves give installers and users the option to set storage heights that suit specific contents such as dishes, supplies, or containers, which improves daily function without altering the cabinet structure. The three-ply flat panel plywood insert with hard maple veneer maintains panel stability inside the door frame, helping the door profile remain true as humidity conditions change in kitchens or shops.
The Kitchen Kompact Warmwood wall cabinet measures 27 inches wide, 30 inches high, and 12 inches deep, so it fits standard upper cabinet layouts using that width and depth.
The cabinet door frames use mortised and tenoned construction in solid 3/4 inch maple, providing strong mechanical joints that help doors stay square and aligned during everyday operation.
The Warmwood WW27W cabinet uses solid wood corner blocks that are glued and power nailed, so the case stays rigid and square during mounting and while supporting stored items.
The maple flat panel doors use concealed, self-closing hinges, keeping hardware hidden while drawing doors closed at the end of travel for a clean cabinet face line.
The Kitchen Kompact Warmwood wall cabinet finish uses a four step process of stain, sealer, sanding, and catalyzed top coat to create a consistent, durable surface.
The WW27W wall cabinet provides adjustable shelves, allowing the interior storage height to be configured for different dish, supply, or container sizes.
The Kitchen Kompact Warmwood wall cabinet 27 inch pairs a 27 inch by 30 inch by 12 inch format with maple flat panel doors, so it fits standard wall positions while matching other Warmwood pieces. Solid 3/4 inch maple mortised and tenoned door frames, three-ply flat panel inserts, and solid wood corner blocks give the cabinet a structural base that supports repeated daily use in kitchen or shop environments.
Solid wood hanging strips at the top and bottom and concealed, self-closing hinges simplify mounting and door alignment work. For projects built around Kitchen Kompact Warmwood, this WW27W unit helps fill upper runs with consistent construction and finish.
Sold In: 1 Each