Kitchen Kompact wall cabinet in the WW36W model gives a 36 inch wide Warmwood wall unit sized for typical upper runs at 30 inches high and 12 inches deep, so layout ties into standard kitchen elevations without special framing. The Warmwood identification matches the WARMWOOD 36W description, which keeps finishes aligned when this cabinet is used alongside other Kitchen Kompact pieces. This wall cabinet follows the Kitchen Kompact product class, so construction details and appearance follow the same line for predictable results across a project. With a recessed panel design, it suits flat-panel layouts where clean faces simplify alignment with adjacent doors and trim. The wall format lets installers build continuous storage at eye level while staying within common depth, so clearances to hoods and fixtures stay consistent.
This Warmwood wall cabinet is 36 inches wide, 30 inches high, and 12 inches deep, so it fits typical upper cabinet rows where installers follow standard heights above countertops. Maple flat panel doors on the front match the flat panel plywood insert, which keeps the face consistent from rail to panel when doors are closed. Concealed, self-closing hinges are built into the doors, allowing the hinges to sit out of sight while pulling the doors shut at the end of travel for a clean look. The adjustable shelves inside work with this footprint by letting installers set working heights that suit the 12 inch depth, so stored items use the interior volume efficiently.
The WW36W Warmwood cabinet is a 36 inch wide wall unit, so it often spans a cooktop, sink, or work area where a single upper cabinet run is preferred. At 30 inches high, it matches common upper rows, allowing it to align with other Kitchen Kompact wall cabinets in the same height group. The 12 inch depth keeps the cabinet face in line with other standard wall cabinets, helping maintain a straight run over countertops and backsplashes. Maple flat panel doors and the flat panel plywood insert with rotary cut hard maple veneer face present a unified maple look, which suits Warmwood kitchen layouts that rely on consistent grain and tone.
Mortised and tenoned construction of solid 3/4 inch maple in the door frames holds corners tight, which helps doors stay aligned with neighboring fronts over time. Solid wood corner blocks that are glued and power nailed keep the cabinet box rigid, supporting accurate reveals when units are ganged side by side. Solid wood hanging strips located on the top and bottom create defined fastening zones that help installers set and secure level lines across multiple studs. The three-ply flat panel plywood insert with its hard maple veneer face resists typical panel movement, so door centers maintain a flat appearance against the frame. The four step process of stain, sealer, sanding and catalyzed top coat ties these parts together visually, supporting a continuous Warmwood finish from cabinet to cabinet in the run.
The Kitchen Kompact WW36W wall cabinet measures 36 inches wide, 30 inches high, and 12 inches deep, so it fits standard upper cabinet runs and typical countertop clearances.
The Warmwood door frames use mortised and tenoned construction of solid 3/4 inch maple, giving the doors a strong, interlocking joint that supports long-term alignment.
The WW36W cabinet uses solid wood corner blocks that are glued and power nailed, reinforcing each corner so the cabinet box stays square when mounted.
The doors use a flat panel plywood insert made as a three-ply panel with a rotary cut hard maple veneer face, giving a stable center with a consistent maple surface.
The Warmwood WW36W wall cabinet uses adjustable shelves, allowing interior spacing to be set around different dish or glass heights within the fixed cabinet box.
The WW36W cabinet receives a four step process of stain, sealer, sanding and catalyzed top coat, building a controlled finish system over the maple components.
The WW36W Kitchen Kompact wall cabinet pairs its 36 inch width, 30 inch height, and 12 inch depth with maple flat panel doors, mortise and tenon construction, and adjustable shelves, giving a Warmwood unit ready for standard upper layouts. Solid wood hanging strips and reinforced corners support secure wall installation in continuous runs. Put this Warmwood recessed panel cabinet to work wherever a standard-depth upper is needed in a coordinated Kitchen Kompact kitchen.
Sold In: 1 Each