Kitchen Kompact Warmwood wall cabinet gives you a 30 inch wide, 30 inch high, 12 inch deep upper cabinet that fits standard wall runs and keeps layout predictable on the wall. The recessed panel Warmwood style with maple flat panel doors delivers a consistent framed look that matches other Kitchen Kompact pieces for a unified run. Door frames use mortised and tenoned construction in solid 3/4 inch maple, creating a rigid frame that stays square during hanging and daily use. Solid wood corner blocks are glued and power nailed, tying the cabinet box together so it resists racking when fastened to studs. A flat panel plywood insert with a three ply panel and rotary cut hard maple veneer face provides a stable center panel that holds finish evenly. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied to the cabinet, creating a finished surface tailored for typical kitchen environments.
This Kitchen Kompact 30 inch wide, 30 inch high, 12 inch deep Warmwood wall cabinet lines up with common upper cabinet heights, helping runs stay level under standard trim or ceiling conditions. Solid wood hanging strips on the top and bottom of the cabinet provide continuous solid material for fastening, giving installers dependable anchor zones across the width and height. The mortised and tenoned 3/4 inch solid maple door frames keep the doors square to the cabinet face, which supports clean reveals once the cabinet is shimmed plumb on the wall. Solid wood corner blocks that are glued and power nailed tie the cabinet box together, so the cabinet maintains shape when tightened against wall studs. Adjustable shelves allow interior spacing to respond to final mounting height, helping the interior layout match how the upper run will be used.
The Kitchen Kompact 30 inch wide Warmwood wall cabinet is sized for use as a standard upper cabinet in kitchen layouts, where its 30 inch height works in typical runs over counters. The 12 inch depth keeps the cabinet within common over-counter projections, helping maintain headroom and workspace clearance. Maple flat panel doors in the Warmwood finish align with other Kitchen Kompact pieces in the same style, supporting continuous runs across multiple cabinets. The rotary cut hard maple veneer face on the three ply flat panel insert coordinates with the maple door frames, giving a consistent grain and color presentation across the full door. Solid wood hanging strips at the top and bottom support use in straight runs or corner configurations, because fasteners can be placed at multiple points along each strip without searching for structural material. Concealed, self-closing hinges keep the hardware inside the cabinet envelope, which helps upper runs present a clean face line when viewed from across the room.
The mortised and tenoned construction of the solid 3/4 inch maple door frames provides precise joints that help doors hang true on their concealed, self-closing hinges, so reveals stay even along the face when the run is leveled. Solid wood corner blocks that are glued and power nailed hold the box square as it is drawn to the wall, limiting distortion while fasteners bring the back tight against irregular surfaces. Solid wood hanging strips on both the top and bottom edges let installers use fastening patterns that match stud locations, which streamlines layout and reduces time chasing backing. The 4 step finish system of stain, sealer, sanding and catalyzed top coat creates a uniform surface, so doors and face frames across multiple cabinets read the same once installed under kitchen lighting. Adjustable shelves allow field adjustment after the cabinet is set, letting users fine tune interior spacing without affecting the exterior alignment of the run. The rotary cut hard maple veneer face on the three ply panel gives a familiar maple appearance that coordinates with common trim and moldings used around upper cabinets.
The Kitchen Kompact Warmwood wall cabinet measures 30 inches wide, 30 inches high, and 12 inches deep, which fits standard kitchen upper cabinet layouts and common over-counter depths.
The door frames are solid 3/4 inch maple and the flat panel insert is a three ply plywood panel with a rotary cut hard maple veneer face, giving a coordinated maple appearance.
The cabinet door frames use mortised and tenoned construction in solid 3/4 inch maple, creating strong, precise corner joints that help keep doors square and aligned on the hinges.
The Warmwood wall cabinet uses concealed, self-closing hinges, which hide the hardware when doors are shut and pull the doors closed at the end of their swing.
The cabinet has adjustable shelves, allowing the interior spacing to be set around common dinnerware or pantry items after the cabinet is mounted in the run.
The Warmwood finish uses a 4 step process of stain, sealer, sanding and catalyzed top coat, producing a consistent cabinet surface suited to typical kitchen use.
The Kitchen Kompact Warmwood 30 inch wide by 30 inch high by 12 inch deep wall cabinet provides a straightforward upper unit that matches common kitchen dimensions and styles. Mortised and tenoned solid 3/4 inch maple door frames, solid wood corner blocks, and solid wood hanging strips create a stable cabinet that holds shape when anchored to framing. The three ply flat panel plywood insert with rotary cut hard maple veneer face and the 4 step stain, sealer, sanding and catalyzed top coat finish establish a coordinated Warmwood appearance. Maple flat panel doors, concealed self-closing hinges, and adjustable shelves round out a wall cabinet suited for standard kitchen runs that call for dependable construction and a consistent Warmwood look.
Sold In: 1 Each