
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood wall cabinet defines a straightforward 18 inch wide, 30 inch high, 12 inch deep upper cabinet that fits standard wall runs, so layouts line up cleanly across most kitchen or shop projects. The door frames use mortised and tenoned construction in solid 3/4 inch maple, which locks the joints mechanically and supports repeated door operation without loosening under normal residential use. Solid wood corner blocks are glued and power nailed, tying the cabinet box together at stress points so the case stays square when it is fastened through the back or sides. A flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face provides a stable, flat door center that keeps the Warmwood look consistent. Maple flat panel doors tie these elements together, giving a matched door frame and panel material for an even appearance across a row of cabinets.
Solid wood hanging strips located on the top and bottom of the cabinet create defined fastening zones, so wall screws can be placed along those strips for a secure mount into studs. Because the case is reinforced with solid wood corner blocks that are glued and power nailed, the cabinet box resists racking when it is tightened to the wall and aligned with neighboring units. Adjustable shelves inside the 18 inch wide, 12 inch deep cabinet let the installer set heights after the case is mounted, which helps fine-tune clearances for taller items. Concealed, self-closing hinges are built into the cabinet design, allowing the doors to close themselves at the end of travel while keeping hinge hardware out of sight when the doors are shut.
The WW18W wall cabinet from Kitchen Kompact provides an 18 inch wide by 30 inch high footprint, so it drops into common upper cabinet runs where that width is needed between corners, hoods, or windows. At 12 inches deep, the cabinet aligns with typical wall cabinet depths, which keeps fronts in plane along the run and supports standard countertop clearances. Maple flat panel doors present a neutral, flat profile that integrates with other Warmwood cabinets in the same line, so banks of cabinets maintain a consistent door style. The flat panel plywood insert with rotary cut hard maple veneer face keeps the door center visually tied to the maple frames, which supports a continuous Warmwood look across the kitchen or work area.
Mortised and tenoned solid 3/4 inch maple door frames on the WW18W create precise corners, so hinge mounting points stay stable and doors hang square relative to the cabinet box. Solid wood hanging strips at both the top and bottom edges give installers two strong fastening bands, which supports level installation and lets the cabinet be drawn tight to uneven walls without distorting the case. Solid wood corner blocks that are glued and power nailed lock the case geometry, so when cabinets are ganged together, face frames line up more predictably along vertical seams. The 4 step process of stain, sealer, sanding and catalyzed top coat creates a layered Warmwood finish, so face frames, doors and panels carry a coordinated color and sheen from unit to unit. Adjustable shelves further refine alignment inside the cabinet, allowing shelf heights to match neighboring cabinets for a uniform interior layout.
The WW18W cabinet measures 18 inches wide, 30 inches high, and 12 inches deep, so it fits standard wall cabinet runs and typical upper cabinet depths.
The door frames use solid 3/4 inch maple with mortised and tenoned joints and a flat panel plywood insert with rotary cut hard maple veneer, giving a stable, maple-faced door assembly.
The cabinet case uses solid wood corner blocks that are glued and power nailed, so the box stays square under normal wall mounting and when cabinets are joined side by side.
The cabinet uses solid wood hanging strips at the top and bottom, providing defined wood fastening zones for securing the unit to wall framing.
The cabinet uses concealed, self-closing hinges, so the hardware stays out of sight when doors are closed and doors pull themselves shut at the end of swing.
The WW18W cabinet has adjustable shelves, allowing shelf positions to be set for different dish, food, or supply heights as storage needs change.
The Kitchen Kompact Warmwood 18W wall cabinet delivers a defined 18 inch by 30 inch by 12 inch size, so it slots into upper layouts where that footprint is required. Mortised and tenoned solid 3/4 inch maple door frames, flat panel plywood inserts with rotary cut hard maple veneer, and maple flat panel doors support a consistent Warmwood appearance along the run. Solid wood hanging strips and solid wood corner blocks create a stable case for wall mounting, while adjustable shelves and concealed, self-closing hinges support practical everyday use. Add this WW18W cabinet to complete Warmwood upper cabinet sequences with matching style and construction.
Sold In: 1 Each