Kitchen Kompact Warmwood wall cabinet is a 21 inch wide, 30 inch high, 12 inch deep wall cabinet that provides a standard upper-cabinet footprint for kitchen layouts where consistent sizing keeps installation straightforward. The cabinet uses a recessed panel design that visually matches flat panel maple doors, helping runs look uniform when setting multiple cabinets in line. Door frames are mortised and tenoned construction of solid 3/4 inch maple, creating a rigid frame that stays square, which helps doors hang true on concealed, self-closing hinges. Solid wood corner blocks are glued and power nailed at the joints, tying the case together so it resists racking when hung on a wall. Solid wood hanging strips located on the top and bottom give a solid mounting surface along two edges, supporting typical wall-mount installation while distributing load across the cabinet back.
Solid wood hanging strips located on the top and bottom of this cabinet give two continuous mounting zones, letting installers fasten through substantial wood when attaching the unit to wall framing so the load is shared across the cabinet width. Door frames built from solid 3/4 inch maple hold mortised and tenoned joints, so hinge screw locations sit in solid hardwood, supporting typical door swing loads over time. The concealed, self-closing hinges operate behind the maple flat panel doors, so the front of the Warmwood cabinet stays visually clear while the hinge action draws the doors closed once they are moved within the self-closing range. Adjustable shelves can be set at different positions inside the 30 inch high interior, allowing the vertical space to be tailored after the cabinet is mounted.
The 21 inch width on this Warmwood WW21W wall cabinet fits into upper runs where an installer needs a mid-width cabinet between wider or narrower units, helping balance wall space in a layout. With a 30 inch height, the cabinet matches common wall cabinet heights, so it can line up with other Kitchen Kompact wall cabinets to create an even bottom line across a kitchen. The 12 inch depth keeps the cabinet in the typical upper-cabinet profile, which provides storage without projecting excessively into the room. Maple flat panel doors with a recessed panel design suit applications where a flat center panel and framed maple perimeter are preferred, supporting traditional or simple transitional door styling. Solid wood hanging strips at both the top and bottom edges of the back allow placement on standard framed walls where multiple studs are available across the cabinet width.
Door frames built from solid 3/4 inch maple and joined with mortised and tenoned construction give a strong, square frame that resists twisting, which helps the concealed, self-closing hinges operate smoothly and keeps reveal lines more even across doors. Solid wood corner blocks that are glued and power nailed at the joints stiffen the cabinet box, so the case stays aligned when fastened through the hanging strips into wall structure. The flat panel plywood insert uses a three-ply panel with a rotary cut hard maple veneer face, delivering a stable center panel that presents a maple grain appearance to the room while remaining supported by the surrounding frame. The 4 step process of stain, sealer, sanding and catalyzed top coat produces a layered Warmwood finish over the maple components, which protects the visible surfaces during everyday door use. Adjustable shelves work with the 21 inch width to let installers or end users set shelf positions that match stored items, helping the full cabinet volume get used efficiently.
The Kitchen Kompact Warmwood wall cabinet is 21 inches wide, 30 inches high, and 12 inches deep, which aligns with common upper cabinet sizing for standard kitchen wall runs.
The cabinet uses a solid 3/4 inch maple door frame with a flat panel plywood insert that has a rotary cut hard maple veneer face, giving a maple appearance across both frame and panel.
The door frames are mortised and tenoned construction of solid 3/4 inch maple, so the joints interlock, supporting hinge loads and regular door operation on the concealed, self-closing hinges.
The Kitchen Kompact Warmwood cabinet uses concealed, self-closing hinges, which keep hardware out of sight from the front while drawing the maple flat panel doors closed after use.
Solid wood corner blocks are glued and power nailed, and solid wood hanging strips are located on the top and bottom, creating a reinforced box suitable for typical wall mounting.
The cabinet uses a 4 step process of stain, sealer, sanding and catalyzed top coat, producing a finished Warmwood surface on the maple components for normal kitchen environments.
The Kitchen Kompact Warmwood wall cabinet with 21 inch width, 30 inch height, and 12 inch depth gives a defined size for laying out upper kitchen runs. Solid 3/4 inch maple door frames with mortised and tenoned construction, solid wood corner blocks, and solid wood hanging strips provide a case and door structure suited to standard wall installation and everyday door use. Maple flat panel doors with a rotary cut hard maple veneer face panel present a consistent Warmwood appearance across the cabinet front. Adjustable shelves and concealed, self-closing hinges support practical storage and door function. When a mid-width upper cabinet is needed in a Warmwood run, the WW21W format aligns with common dimensions and construction expectations.
Sold In: 1 Each