Kitchen Kompact Warmwood wall cabinet WW33WT is a 33 inch wide, 36 inch high, 12 inch deep wall cabinet designed to add usable storage space while keeping a consistent upper line in the kitchen. The recessed panel door style with a flat panel plywood insert creates a clean, framed look that works well in straightforward kitchen layouts where installers need predictable, repeatable results. The door frames use mortised and tenoned construction in solid 3/4 inch maple, which keeps the joints mechanically interlocked so doors stay square during handling, hanging, and everyday use. Solid wood corner blocks are glued and power nailed, tying cabinet sides together so the box stays rigid when lifted into place. Maple flat panel doors match the maple veneer face on the three-ply flat panel, helping maintain a uniform appearance from door frame to center panel.
This Kitchen Kompact wall cabinet measures 33 inches wide, 36 inches high, and 12 inches deep, so it fits common upper cabinet runs where a 33 inch span is needed above counters or appliances. The 36 inch height matches typical wall cabinet rows that terminate below standard ceiling lines, which helps maintain a continuous top profile when planned with other cabinets of the same series. The 12 inch depth keeps the cabinet within standard reach over base cabinets, so doors clear backsplash and countertop activities. Solid wood hanging strips on both the top and bottom edges provide continuous fastening areas, which supports firm anchoring into wall framing and helps the cabinet stay aligned with neighboring units once the run is leveled and fastened.
The Warmwood 33WT wall cabinet is designed for installations that call for a 33 inch wide upper unit in the Kitchen Kompact line, such as runs over base cabinets or sections spanning shorter wall segments. The 36 inch height works in layouts that use a standard wall cabinet height, keeping the top of the uppers at a consistent elevation when combined with other 36 inch tall units. Its 12 inch depth allows it to sit properly above typical 24 inch deep base cabinets, leaving comfortable working space on the countertop beneath. The recessed panel, maple flat panel doors and Warmwood finish coordinate with other Kitchen Kompact Warmwood pieces, so this cabinet can function as a central unit in a run or as a transition piece between different widths in the same collection.
The mortised and tenoned solid 3/4 inch maple door frames on this cabinet hold the corners of each door in fixed alignment, which supports accurate reveals when installers adjust the concealed, self-closing hinges. Those concealed hinges pull the doors into a predictable closed position, helping neighboring doors line up along vertical and horizontal lines without repeated tweaking. Solid wood corner blocks, glued and power nailed, give the cabinet box the stiffness needed to stay square while it is clamped or held in place on the wall, which helps keep the face frame straight when cabinets are ganged together. The three-ply flat panel insert with rotary cut hard maple veneer face keeps the center panel stable across seasons, so reveal gaps around the panel stay more uniform and the Warmwood finish reads consistently across the door surface. Solid wood hanging strips at the top and bottom spread mounting loads across the cabinet back, supporting firm fastening while aligning the wall cabinet with adjoining units along both the top and bottom edges.
The WW33WT wall cabinet is 33 inches wide, 36 inches high, and 12 inches deep, which fits common upper cabinet layouts above standard base cabinets and appliances.
The Kitchen Kompact door frames use mortised and tenoned solid 3/4 inch maple, creating interlocking joints that help keep the doors square and stable through regular kitchen use.
The flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, which provides a stable center panel and supports a consistent Warmwood appearance.
Solid wood hanging strips located on the top and bottom provide continuous solid backing for fasteners, which helps the cabinet anchor firmly to wall framing.
The Warmwood cabinet uses a four step process of stain, sealer, sanding, and catalyzed top coat, creating a finished surface suited to normal kitchen contact.
The Kitchen Kompact Warmwood wall cabinet uses concealed, self-closing hinges, which hide the hardware and pull doors into a consistent closed position.
The Kitchen Kompact Warmwood wall cabinet WW33WT brings a 33 inch wide, 36 inch high, 12 inch deep wall unit with recessed panel maple doors and adjustable shelves to standard kitchen runs. Mortised and tenoned 3/4 inch maple door frames, three-ply maple veneer flat panels, and solid wood corner blocks create a rigid, square cabinet suited to straightforward installation. Solid wood hanging strips at the top and bottom support secure fastening into wall framing. For projects using the Kitchen Kompact Warmwood line, this wall cabinet slots into upper runs where a 33 inch width and 36 inch height match the planned layout.
Sold In: 1 Each