Kitchen Kompact warmwood wall cabinet describes a 24 inch wide, 36 inch high, 12 inch deep wall cabinet that fits standard upper-cabinet runs, so layouts with common 24 inch modules align cleanly across a kitchen wall. The recessed panel Warmwood design ties directly to the WW24WT model, giving installers a defined style match for jobs that already use this Kitchen Kompact line. Door frames use mortised and tenoned construction in solid 3/4 inch maple, creating a rigid joint that supports repeated door use along a busy wall run. Solid wood corner blocks are glued and power nailed, adding reinforcement at stress points where wall loads transfer through the cabinet case. Maple flat panel doors present a consistent face with the flat panel plywood insert, so the door and center panel read as a unified Warmwood front.
This 24 inch wide, 36 inch high, 12 inch deep Kitchen Kompact maple wall cabinet sizes into upper runs where 12 inch depth keeps wall projections consistent, helping crown lines and appliance clearances work to plan. Solid wood hanging strips on the top and bottom give defined, continuous fastening areas, so installers can locate studs and secure the cabinet through solid stock. The 4 step stain, sealer, sanding, and catalyzed top coat process creates the Warmwood finish layer, so the visible faces match other Warmwood pieces from the same line. Concealed, self-closing hinges sit behind the maple flat panel doors, keeping the front clean while doors close to a consistent position across a wall bank.
The Warmwood WW24WT wall cabinet, at 24 inches wide, works as a standard module in upper cabinet layouts, so it ties into common 3 inch planning increments across a run. Its 36 inch height places it in the typical full-height wall cabinet category, aligning with many standard ceiling and backsplash dimensions. With a 12 inch depth, the cabinet projects the same distance as most upper units, which helps keep lines uniform above counters. The recessed panel Warmwood door style and maple flat panel doors connect with the Kitchen Kompact category, so this unit matches other Kitchen Kompact Warmwood cabinets that use the same door construction and finish steps. Adjustable shelves inside respond to different storage needs, letting installers set shelf positions that support the planned contents for that specific location.
Solid wood hanging strips located on the top and bottom give consistent fastening zones, so crews can drive fasteners through the same solid backing on every WW24WT during a run. Door frames built with mortised and tenoned joints in solid 3/4 inch maple create a stable rectangle, which supports hinge placement and helps maintain even reveals between adjacent doors. Solid wood corner blocks that are glued and power nailed reinforce the cabinet box, allowing wall loads to distribute into the joined corners when multiple units are ganged together. The flat panel plywood insert, built as a three-ply panel with a rotary cut hard maple veneer face, helps the center panel sit flat in the frame, so the recessed look repeats cleanly from door to door. Concealed, self-closing hinges pull doors shut to a consistent stop, which supports uniform gaps and a tidy face line across the installation. The 4 step Warmwood finishing process of stain, sealer, sanding, and catalyzed top coat is applied to the visible wood, supporting color and sheen consistency when several cabinets share the same wall.
The Kitchen Kompact warmwood wall cabinet measures 24 inches wide, 36 inches high, and 12 inches deep, which fits typical upper cabinet runs in standard kitchen layouts.
The cabinet uses door frames with mortised and tenoned construction in solid 3/4 inch maple and a flat panel plywood insert, providing a recessed panel Warmwood style front.
Solid wood hanging strips located on the top and bottom give clear fastening areas, so fasteners can be driven into solid wood for stable wall mounting of the cabinet.
The WW24WT wall cabinet uses concealed, self-closing hinges, which keep hardware hidden while pulling doors closed to a consistent position on the face of the cabinet.
The Warmwood finish uses a 4 step process of stain, sealer, sanding, and a catalyzed top coat, creating a layered coating on the maple and veneer faces.
The Kitchen Kompact warmwood wall cabinet has adjustable shelves, allowing shelf positions to be set to match the planned contents for that wall location.
The Kitchen Kompact 24 inch wide, 36 inch high, 12 inch deep warmwood wall cabinet WW24WT combines defined dimensions with mortised and tenoned 3/4 inch maple door frames and solid wood hanging strips, so it fits standard upper rows while supporting stable wall mounting and a coordinated Warmwood recessed panel look.
Sold In: 1 Each