Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood wall cabinet is a 30 inch wide, 36 inch high, 12 inch deep wall cabinet that provides a defined storage footprint, which helps lay out wall runs and keeps upper cabinet lines consistent. The cabinet has a recessed panel design, so the doors present a flat panel look that suits a wide range of kitchen styles while staying visually clean above counters. The doors use maple flat panel construction, which gives a hard maple face to match other maple-front components in the same space. The product is identified as model WW30WT and WARMWOOD 30WT, so it can be specified accurately on drawings and material lists. Solid wood hanging strips are located on the top and bottom, which creates fixed mounting points that help transfer cabinet load to the wall framing. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied, which builds a finished surface that is prepared for typical kitchen use.
This Kitchen Kompact 30 inch wide, 36 inch high, 12 inch deep wall cabinet sets a standard upper cabinet footprint that aligns with common base cabinet widths and typical countertop depths. The solid wood hanging strips on the top and bottom act as structural rails, which helps position mounting fasteners into these areas when attaching the cabinet to wall studs. Door frames built from solid 3/4 inch maple give the front of the cabinet a defined thickness, which is useful when aligning door faces with adjacent cabinets in a row. Concealed, self-closing hinges are integrated into the door design, which affects how the doors move and seat against the cabinet front during installation and adjustment. Adjustable shelves inside the cabinet respond to different stored item heights, which supports layout planning for both tall and short contents in specific sections.
The Kitchen Kompact 30 inch wide by 36 inch high by 12 inch deep wall cabinet fits well in upper wall runs where a 30 inch module is required, which is common over base cabinets or appliances set to that width. The recessed panel design with maple flat panel doors allows the cabinet to sit alongside other Warmwood or maple-front pieces while keeping a consistent door profile across the kitchen. Door frames built from solid 3/4 inch maple bring a defined frame edge, which is useful when lining up adjacent door reveals and planning for molding or trim at the top of the wall run. The three-ply flat panel plywood insert with rotary cut hard maple veneer face provides a matching maple appearance on the door center, which keeps the door fields visually coordinated with the solid maple frames in typical viewing positions.
Mortised and tenoned construction of the solid 3/4 inch maple door frames provides a joint configuration that supports long-term squareness of the doors, which helps reduce the need for door repositioning after installation. Solid wood corner blocks that are glued and power nailed create reinforced box corners, which supports the cabinet when it is loaded with dishes or pantry items on adjustable shelves. Solid wood hanging strips at the top and bottom define structural mounting zones, which helps installers plan screw placement along those strips to anchor into framing. The 4 step process of stain, sealer, sanding and catalyzed top coat yields a finished maple surface, which helps the Warmwood appearance stay consistent with other finished pieces in the same room over time. Concealed, self-closing hinges control how the doors close to the face frame, which supports a uniform door gap and clean look without visible hinge hardware on the exterior.
The Kitchen Kompact WW30WT wall cabinet measures 30 inches wide, 36 inches high, and 12 inches deep, which sets the footprint when laying out upper cabinet runs.
The door frames are solid 3/4 inch maple with mortised and tenoned construction, which supports square, stable doors for repeated opening and closing.
The door has a flat panel plywood insert made as a three-ply panel with a rotary cut hard maple veneer face, providing a stable core with a maple appearance.
The cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, creating a finished maple surface suited to typical kitchen environments.
The Kitchen Kompact Warmwood wall cabinet has adjustable shelves, allowing the interior height to be set for different dish or pantry item sizes.
The WW30WT cabinet uses concealed, self-closing hinges, which keep hardware hidden and pull the doors closed at the end of their swing.
The Kitchen Kompact Warmwood 30 inch by 36 inch by 12 inch wall cabinet offers a defined size, solid 3/4 inch maple mortised and tenoned door frames, and maple flat panel doors, which together support consistent alignment in upper runs. Solid wood corner blocks and solid wood hanging strips give the cabinet box and mounting areas added strength, which helps the cabinet perform in everyday kitchen storage duty. The three-ply flat panel plywood insert with rotary cut hard maple veneer face and the 4 step stain, sealer, sanding and catalyzed top coat process create a coordinated Warmwood maple finish. Choosing this WW30WT wall cabinet helps align design, size, and construction details with other Kitchen Kompact Warmwood pieces on the same project.
Sold In: 1 Each