Kitchen Kompact Warmwood wall cabinet in the WW15WT model provides a 15 inch wide, 36 inch high, 12 inch deep upper cabinet built for standard wall runs where a narrow cabinet is required. The door frames use mortised and tenoned construction of solid 3/4 inch maple, which locks the corners together firmly so the frame stays square as the door is used over time. Solid wood corner blocks are glued and power nailed at the cabinet corners, so the case resists racking when it is handled and fastened during installation. A flat panel plywood insert with a three-ply panel and a rotary cut hard maple veneer face gives the recessed panel door a consistent maple appearance while keeping the door panel stable. Maple flat panel doors give the front of the unit a unified maple look that matches the Warmwood finish for runs using this line.
Kitchen Kompact wall cabinet construction in the WW15WT model uses solid wood hanging strips on the top and bottom, so installers have defined bands to align with wall framing or backing when setting fasteners. The solid 3/4 inch maple door frame around the recessed flat panel gives the hinges a solid anchoring substrate, so hinge screws bite into real wood at the stile. Mortised and tenoned door frame construction holds the rails and stiles in fixed relationship, which helps the door stay true at the perimeter as it is adjusted on the concealed hinges. Solid wood corner blocks that are glued and power nailed tie the cabinet sides to the top and bottom, so the case resists twisting while it is being lifted, clamped, and fastened into a wall run.
The Warmwood 15 inch wall cabinet with recessed panel front is sized at 15 inches wide, 36 inches high, and 12 inches deep, so it fits typical upper cabinet grids that call for a narrower unit between appliances or at run ends. Its maple flat panel doors with a rotary cut hard maple veneer face on the flat panel plywood insert present a Warmwood maple appearance, so it lines up visually with other Kitchen Kompact Warmwood cabinets in the same space. The mortised and tenoned door frames in solid 3/4 inch maple hold their shape, so door reveals can be aligned with adjacent units for a continuous front. The 4 step process of stain, sealer, sanding and catalyzed top coat is applied across the cabinet exterior, so neighboring Warmwood units share a matching finish sheen and color in the bank.
The WW15WT wall cabinet uses solid wood hanging strips on both the top and bottom edges, which provides two structural bands to pull tight to the wall and keep the cabinet plane flush with adjoining units. Solid wood corner blocks, glued and power nailed at the corners, brace the case during clamping and fastening, so the cabinet holds square when it is tied into a longer run. Concealed, self-closing hinges on the maple flat panel doors allow the hinge adjustment zones to stay hidden while still giving the ability to fine-tune gaps and overlay, so installers can dial in alignment without exposed hardware. Adjustable shelves inside the cabinet respond to shelf pin placement, so tradespeople can set clearances that match stored items and align shelf heights across adjacent Warmwood wall cabinets. The rotary cut hard maple veneer face on the flat panel insert repeats the grain look across the door field, supporting a consistent appearance when doors are aligned side by side.
The WW15WT wall cabinet is 15 inches wide, 36 inches high, and 12 inches deep, so it integrates into standard upper cabinet layouts that call for this narrow size.
The Warmwood cabinet door frame uses mortised and tenoned construction of solid 3/4 inch maple, which keeps the frame joints locked and supports stable door alignment.
The cabinet door uses a flat panel plywood insert that is a three-ply panel with a rotary cut hard maple veneer face, providing a maple appearance on the recessed panel.
The concealed, self-closing hinges keep hardware hidden when the door is shut and pull the door closed at the end of travel, giving a clean front and consistent closing action.
Solid wood hanging strips located on the top and bottom provide continuous structural bands for fastening, helping the cabinet sit firmly and evenly on the wall.
The Warmwood wall cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, creating a consistent stained finish with a hardened protective top layer.
The Kitchen Kompact 15 x 36 cabinet in the Warmwood WW15WT configuration combines a 15 inch width, 36 inch height, and 12 inch depth with maple flat panel doors, so it fills upper runs that need a narrower Warmwood unit. Mortised and tenoned solid 3/4 inch maple door frames, solid wood corner blocks, and solid wood hanging strips provide a structural case and door assembly suited to being tied into longer Kitchen Kompact Warmwood layouts. For projects calling for a recessed panel Warmwood wall cabinet that matches other pieces in this line, this WW15WT model provides the defined size and construction details needed to plan a continuous wall run.
Sold In: 1 Each