Kitchen Kompact Warmwood wall cabinet describes a 12 inch wide, 36 inch high, 12 inch deep unit built for upper kitchen runs, so it fits standard wall layouts where a narrow cabinet is needed without crowding appliances or corners. The cabinet uses door frames with mortised and tenoned construction in solid 3/4 inch maple, which creates a mechanically interlocked joint that stays square during handling and normal use. A flat panel plywood insert built as a three-ply panel with a rotary cut hard maple veneer face gives the recessed panel door a stable center that resists typical seasonal movement. Maple flat panel doors tie the maple frame and insert together, so the door presents one continuous maple appearance across the front. Solid wood corner blocks that are glued and power nailed reinforce internal corners, which keeps the carcass tight when it is lifted, hung, or loaded with everyday kitchen contents.
Kitchen Kompact wall cabinet construction uses solid wood hanging strips on both the top and bottom, giving installers clear bands to fasten through when anchoring the 36 inch high cabinet to wall framing. These hanging strips distribute fastener loads across solid wood, which supports the 12 inch deep case when it is filled during everyday service. Concealed, self-closing hinges are used on the maple flat panel doors, so the hardware stays out of sight from the front and pulls doors fully closed at the end of travel. This hinge style supports a clean front appearance while helping doors return to the cabinet face without manual latching. The Warmwood 12 inch wide format works wherever a narrow wall unit is needed to complete a run next to hoods, windows, or tall cabinets while keeping door swing clear.
The Warmwood 12 inch wall cabinet with 36 inch height and 12 inch depth fits naturally into upper cabinet runs that follow standard kitchen proportions, so it can act as a narrow filler or dedicated storage bay. Its recessed panel wall cabinet design, using maple flat panel doors and a plywood insert with rotary cut hard maple veneer face, matches other Warmwood units that share the same door style for visual continuity. Solid wood corner blocks that are glued and power nailed keep the cabinet box rigid as it is set in place alongside adjacent cabinets, which helps seams between units stay tight along the face frame line. Solid wood hanging strips at the top and bottom give consistent fastening zones across multiple cabinets, so installers can follow a repeatable screw line along the run without rethinking every unit. The 12 inch depth keeps stored items within easy reach above counters, maintaining typical countertop clearance.
The WW12WT wall cabinet relies on mortised and tenoned construction for its solid 3/4 inch maple door frames, which creates precise corner joints that help the recessed panel doors stay square relative to the cabinet opening. This joint structure works with the concealed, self-closing hinges to keep reveals around the maple flat panel doors even, which simplifies fine-tuning door gaps in the field. The three-ply flat panel plywood insert with a rotary cut hard maple veneer face gives the recessed center panel strength without adding excessive weight, which keeps hinge loading within normal ranges. The four step finishing sequence - stain, sealer, sanding, and catalyzed top coat - builds a protective film over the Warmwood tone, supporting color consistency across doors and face frames in the same kitchen. Adjustable shelves let users place heavier or taller items where hinge action and door clearances still feel natural, so the cabinet interior can be tuned after installation to match how the kitchen is used.
The WW12WT cabinet is 12 inches wide, 36 inches high, and 12 inches deep, so it fits standard upper cabinet layouts that call for a narrow wall unit.
The Warmwood door frames use mortised and tenoned solid 3/4 inch maple, giving the doors strong, square joints that support reliable alignment over repeated use.
The recessed panel uses a flat three-ply plywood insert with a rotary cut hard maple veneer face, providing a stable panel with a maple appearance for finishing.
The cabinet uses concealed, self-closing hinges, so the hinge hardware stays hidden from the front while pulling the doors fully closed at the end of travel.
The WW12WT uses solid wood hanging strips located on the top and bottom, giving defined fastening zones to support the cabinet on wall framing.
The Warmwood cabinet receives a four step process of stain, sealer, sanding, and catalyzed top coat, building a protective finish over the maple surfaces.
The 12x36x12 kitchen wall cabinet format of the Kitchen Kompact Warmwood WW12WT combines mortised and tenoned solid 3/4 inch maple door frames, a recessed flat panel plywood insert, and maple flat panel doors to deliver a unified look across upper runs. Solid wood corner blocks that are glued and power nailed and solid wood hanging strips located on the top and bottom support reliable mounting in standard kitchen layouts. Concealed, self-closing hinges and adjustable shelves add functional details that keep doors operating smoothly while interior space stays flexible. For projects built around the Warmwood finish and recessed panel style, this wall cabinet fills narrow upper spaces with matching construction and finish steps that align with the rest of the Kitchen Kompact line.
Sold In: 1 Each