Kitchen Kompact wall cabinet describes this 36 inch wide, 36 inch high, 12 inch deep Warmwood wall unit built for standard kitchen wall layouts. The size supports use over base cabinets or work areas where a full-height upper cabinet is needed for functional storage.
The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch maple, which creates a strong, interlocking joint at each corner so the doors handle repeated opening and closing in everyday kitchen use.
Solid wood corner blocks are glued and power nailed, tying the cabinet box corners together so the case stays square during mounting and under normal loaded conditions.
A flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, providing a stable door panel with a maple appearance that suits Warmwood kitchen runs.
Solid wood hanging strips located on the top and bottom give solid mounting surfaces across the cabinet width, which supports secure wall attachment during installation.
This Warmwood 36 inch wide wall cabinet uses solid wood hanging strips located on the top and bottom, which provides strong fastening points for mounting screws into wall framing along the length of the cabinet.
The rigid case created by solid wood corner blocks that are glued and power nailed helps the cabinet maintain square geometry, supporting clean alignment when multiple units are ganged along a wall run.
The 12 inch depth matches standard upper cabinet depth, which fits common countertop and appliance clearances in typical kitchen wall layouts.
Concealed, self-closing hinges on the maple flat panel doors keep hinge hardware out of sight when doors are closed and pull doors shut at the end of travel, which supports consistent door positioning across the installation.
The Kitchen Kompact 36 inch wide x 36 inch high x 12 inch deep Warmwood wall cabinet fits upper cabinet runs that need a taller wall unit over base cabinets, work areas, or appliances where a 36 inch height is specified.
The recessed panel design with a flat panel plywood insert and rotary cut hard maple veneer face ties in with other maple flat panel doors in a Kitchen Kompact layout, supporting visual continuity along the wall.
Door frames built from solid 3/4 inch maple with mortised and tenoned construction suit kitchen areas where cabinet doors are used frequently, because the joint style and material support repeated use without loosening in normal service.
Solid wood hanging strips at the top and bottom make this cabinet a good choice for wall sections where secure anchoring across the cabinet width is important, such as over heavy-use prep zones.
The cabinet size and Warmwood finish identified in the description match the SAP description WARMWOOD 36WT and Manufacturer Part WW36WT, which helps match this unit to drawings or ordering documents that specify these codes.
The three-ply flat panel with rotary cut hard maple veneer face provides a stable door center panel, supporting consistent reveal lines and minimizing panel-related movement that could affect the recessed look during seasonal changes.
Solid wood corner blocks that are glued and power nailed hold the cabinet box joints together so the case resists racking during handling and hanging, which supports straight face frames and better alignment with adjoining cabinets.
The 4 step process of stain, sealer, sanding and catalyzed top coat produces a uniform finish across the Warmwood surfaces, supporting consistent color and sheen from cabinet to cabinet in a run.
Maple flat panel doors combined with concealed, self-closing hinges keep hardware hidden when doors are shut and return the doors to the closed position, leading to a cleaner wall line and consistent gap appearance.
Adjustable shelves let installers set interior spacing to suit the homeowner's intended storage, which improves functional use of the full 36 inch height by aligning shelf positions to common item sizes.
The solid wood hanging strips located on the top and bottom create continuous, strong fastening zones for wall screws, which helps distribute cabinet load across multiple fastener points and supports long-term wall-mount stability.
The cabinet is 36 inches wide, 36 inches high, and 12 inches deep, which suits standard kitchen wall cabinet layouts and typical countertop clearance requirements.
The door frames use solid 3/4 inch maple in mortised and tenoned construction, providing strong joints that support daily door use in kitchen environments.
The recessed panel is a three-ply flat panel plywood insert with a rotary cut hard maple veneer face, giving a flat maple appearance with stable panel construction.
The concealed, self-closing hinges keep hardware hidden when doors are closed and pull doors shut at the end of travel, which supports consistent door alignment.
Solid wood hanging strips located on the top and bottom provide continuous solid fastening areas across the width, supporting stable wall mounting.
The cabinet uses a 4 step process of stain, sealer, sanding and catalyzed top coat, producing a consistent Warmwood finish suited to kitchen use.
The Kitchen Kompact WW36WT Warmwood wall cabinet combines 36 inch width, 36 inch height, and 12 inch depth with maple flat panel doors, concealed self-closing hinges, and solid wood hanging strips, aligning well with standard upper cabinet runs.
The mortised and tenoned solid 3/4 inch maple door frames, three-ply flat panel with rotary cut hard maple veneer face, solid wood corner blocks, and multi-step finish process provide a practical wall cabinet choice when building or extending a Warmwood kitchen layout.
Sold In: 1 Each