Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune overlay pocket door kit gives you an overlay pocket door system built for cabinet depths starting at 22-1/2 inches, so you can design or build multimedia or workspace cabinets around a known minimum depth. The kit is designed for door heights from 35-7/16 inches to 47-1/4 inches, which covers a common range for doors on medium-height cabinets and built-ins. The system uses four slides, which support the pocket door action while the door moves out and then back into the cabinet opening. This pocket door hardware is an overlay design, so the door sits over the cabinet opening rather than inset into the face frame. The hardware is supplied as a coordinated pocket door kit under manufacturer part ALT-ST15-D10L-22 from Sugatsune America, which helps keep the components consistent on a project.
This overlay pocket door hardware uses an overlay pocket door system layout, so the door overlays the cabinet opening while still retracting inside when opened. Door alignment adjustability built into the system gives you the ability to dial in vertical and horizontal door position relative to the cabinet face. The overlay amount up to 3/8 inch, or 10 mm, defines how far the door can overlay the cabinet front, which helps when matching neighboring doors or drawer fronts. The overlay damper unit is equipped with an adjustment screw, so the damping action on the sliding motion can be tuned for the specific cabinet build. Four slides in the system help support the door as it transitions from closed to fully retracted. Fittings in the ALT-ST15-D10L-22 layout let the door retract further into the cabinet than the ALTST20-D10 series, which improves front clearance when the door is open.
This Sugatsune America pocket door hardware falls under pocket door slides in the broader pocket door hardware product class, fitting multimedia and workspace cabinet applications where a retracting overlay door is needed. The overlay pocket door system format works in cabinets with a minimum cabinet depth of 22-1/2 inches, so it suits deeper cases such as media centers or workspace storage where equipment or supplies sit behind the door. The door height range from 35-7/16 inches to 47-1/4 inches targets medium-height doors often used on upper sections of closet, garage, or multimedia cabinetry. Because the fittings allow further door retraction into the cabinet than the ALTST20-D10 series, this kit supports layouts where you want the open door cleared more deeply from the front of the unit. The pocket door slides and synchronized components support that motion pattern in daily use.
The overlay pocket door system with door alignment adjustability lets you adjust the mounted position of the door after installation, which reduces the need to re-drill or re-mount if the reveal is slightly off. An overlay amount up to 3/8 inch, or 10 mm, defines a clear design envelope for the face of the door relative to the cabinet, helping you design consistent reveals across a run of cabinets. The overlay damper unit with an adjustment screw allows you to tune the damping action so the door movement can match the cabinet's weight and use pattern, which supports smoother operation over time. Using four slides distributes the motion and support over multiple points, which benefits the transition as the door travels out and retracts. The fittings that allow further retraction than the ALTST20-D10 series open up designs where front clearance is important, such as areas near walkways or work surfaces, helping cabinets function better in tight layouts.
The Sugatsune overlay pocket door kit is designed for cabinets with a minimum cabinet depth of 22-1/2 inches, which guides case construction and layout for the pocket door.
This pocket door hardware is specified for door heights from 35-7/16 inches to 47-1/4 inches, covering typical medium-height cabinet and built-in doors.
The overlay pocket door system has door alignment adjustability, so you can fine-tune the door position relative to the cabinet face for even gaps and a squared look.
The ALT-ST15-D10L-22 kit supports an overlay amount up to 3/8 inch, or 10 mm, which defines how far the door overlays the cabinet opening in the design.
The overlay damper unit with an adjustment screw lets you adjust damping on the overlay pocket door system, supporting smoother door movement during opening and closing.
The fittings in this kit allow the door to retract further into the cabinet than the ALTST20-D10 series, increasing clearance in front of the cabinet when the door is open.
The Sugatsune overlay pocket door kit ALT-ST15-D10L-22 is a pocket door hardware solution for cabinets with a minimum cabinet depth of 22-1/2 inches and door heights from 35-7/16 inches to 47-1/4 inches. The overlay pocket door system combines four slides, door alignment adjustability, and an overlay damper unit with an adjustment screw, which together support smooth, tunable door motion. Fittings that retract the door further into the cabinet than the ALTST20-D10 series help keep the open door out of the way on multimedia and workspace projects. Select this overlay pocket door system when those dimensions and motion characteristics match your cabinet design.
